941 reviews analysed
1. The"SludgeBoss" Heavy Duty Float Switch for Use With Sewage, Suspended Solids and Viscous Liquids
Description
The SLUDGEBOSS is the float switch for extra nasty locations where there is sewage and suspended solids. This heavy duty dual purpose float switch has an integrated concrete counterweight ensuring its orientation even if held below floating materials. THe switch SPDT and can be used for both emptying and filling operations.
– Directly Controls pumps up to 1/2 HP at 120 Volts or 220 Volts
– Up to 12 Amperes continuous or 13.3 Non continuous AC Amperage
– 12 VDC motor loads up to 13.3 Amps. Contact us for other DC Applications
– Environmental friendly (Mercury Free)
– suitable for use in septic, sump, and potable water applications
– Built with a Honeywell Micro switch, rated for 100,000 operations
– Cable is Coated with PVC / Thermoplastic jacket
– Internally Contains a Stainless Steel Ball
– Manufactured in Argentina
– Five year warranty
– Constructed with non-toxic polypropylene
– Float dimensions are 7 in long x 4.5 inch diameter (180mm x 115mm)
– Rated for indoor or outdoor use: operating temperatures 32 to 140F (0 to 60C), okay to freeze
– CE Marked, IP68 Rated, tested to IEC 60730-1 (08-2003) + IEC 60730-2-16 (08-2001)
– Reinforced Double O Ring Cable Entry
Review online instructions at bit.ly/FloatSwitch2
2. Little Giant 599117 RFSN-9 Piggyback Remote Float Switch for ½ HP Manual Pump
Feature
- FLOAT SWITCH: Float switch consists of one float, a cord with piggyback plug, one large mounting strap and two small adjustable mounting clamps. Convert any manual pump to an automatic pump, up through 1/2 HP.
- PIGGYBACK SWITCH: It is UL listed and has 15 feet power cord, 115/230 volts, 1/2-1 HP and piggyback plug.
- REMOTE FLOAT SWTICH: This Remote Float Switch, is a direct-acting, in-line control system for automatically controlling wastewater, effluent, and sewage pumps.
- LITTLE GIANT FLOAT SWITCH: This Little Giant float switch is a direct-acting, in-line control system for automatically controlling wastewater, effluent, and sewage pumps.
- FLOAT SWITCH DIMENSION: Float Switch is of opening size 0.1 x 4.5 x 8 inches
3. Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP3500
Feature
- Package Content : 6 x Water Level Sensor
- Color :White and yellow
- Model No. : DP3500
- Max Contact Rating : 10W
- Max Switching Current : 0.5A
- Max Breakdown Voltage : 220V DC
- Max Carry Current : 1.0A
- Max Contact Resistance : 100m ohm
- Temperature Rating : -10 / +85 Celsuis
- Float Ball Material : P.P
- Float Body Material : P.P
- Cable Length : 38cm / 15″;Switch Body Size : 45 x 17mm / 1.8″ x0.7″ Thread Dia(Approx) : 13mm / 0.5″
Description
Feature:
This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device.
Simple structure,easy installation liquid level controller.Light weight and simple working principle,high reliability.
It can be easily converted from normally open to normally close by inverting the float.
Please Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay or contactor are not included here.
Package Content
6 x Float Switch
4. BRODY Automatic Float Switch Water Level Sensor on/off control with 10′ Cable
Description
Float Switch Water Level Control Sensor with 10′ Cable ALLOWS ELECTRICAL EQUIPMENT TO START AND STOP AUTOMATICALLY (USUALLY PUMPS, BUT ALSO ELECTRIC CONTROL VALVES, ALARMS, ETC) HIGH RELIABILITY. EASY INSTALLATION. PERFECT AND INFALLIBLE FOR SEWAGE WATER PUMP CONTROL AND ANY KIND OF PUMPING SYSTEM. You can install it as you need: Normally closed or normally open, whichever fits your needs. INCLUDES 10 FEET CABLE , COUNTERWEIGHT AND INSTRUCTIONS. READY TO INSTALL.
5. Madison M8700 Plastic Side-Mounted Liquid Level Float Switch with Polypropylene Stem, 30 VA SPST, 1/2" x 1/2" NPT Male, 100 psig Pressure
Feature
- Side-mounted liquid level switch has a polypropylene stem and a polypropylene float
- Polypropylene is typically suitable for use with acidic liquids such as those found in electroplating and metal cleaning
- Also a great option for lower temperature food operations
- Polypropylene material is a good choice for commercial appliances and equipment as well
- Nominal current rating(s): 30 VA SPST switch
Description
Side-mounted liquid level switch has a polypropylene stem and a polypropylene float. Polypropylene is typically suitable for use with acidic liquids such as those found in electroplating and metal cleaning. It is also a great option for lower temperature food operations (up to 105 degrees C) since Madison only incorporates polypropylene that is FDA approved for food contact. This material is a good choice for commercial appliances and equipment as well. Maximum temperature: 105 degree C, nominal current rating(s): 30 VA SPST switch, Float SG: 0.60. Maximum pressure: 100 psig, lead wires: 22 gauge MTW 24″. CE, CSA, NSF International, UL approvals.
6. Gikfun M8 32mm Liquid Level Sensor Fish Tank Water Float Switch PP Plastic Ball Float Controller DIY Kit for Arduino EK1373x3
Feature
- Float Ball Material: PP
- Float Body Material: PP, the electrical life: can reach more than 1 million times.
- Cable Length: 30cm, Float Ball Size(Approx): 19×16.5mm, Total Length: 45mm / 1.77″, Temperature Rating: -20 ~ +80 C
- The switch has the advantages of high sensitivity and durability. PP material is environmentally friendly and has excellent acid and alkali resistance.
- The switch has the advantages of light weight, simple working principle and low price.
- The product is widely used in various liquid level control applications, and can be used in water dispensers, water heaters, humidifiers, bathroom equipment, etc.
7. GE WH41X365 Washer Water Pressure Switch Hose
8. GE WH13X10017Water Inlet Valve
9. MAKERELE Water Level Sensor Vertical Plastic PP Float Switch 110V,5 Pieces with a Relay Base
Feature
- Product Name: Water Level Sensor.Model No.:MK-PFS6210(110v).Color:white,yellow
- Temperature Rating:-10/+85 Celsuis.Float Ball Material:P.P.Float Body Material:P.P
- Max Switching Current:0.5A.Max Breakdown Voltage:110V DC.Max Carry Current:1.0A.Max Contact Resistance:100m ohm
- Contact Capacity:AC100V.Working Pressure:0.5MPa.Ambient temperature range:-10~+60 Celsius
- Package Content:5 x liquid level sensor with 1xrelay base.Application:sense the level of liquid within a tank.
10. Taidacent Non-Contact Liquid Level Sensor Externally Attached Liquid Induction Level Switch Water Level Switch (PNP Output(24V))
Feature
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level sensor has intelligent liquid level reference adjustment and liquid level memory function, liquid level status display mode, which can realize multi-point series connection
- can support high and low level output, NPN, PNP signal output and RS485 communication interface output
- Open collector output mode, wide voltage range (5~24V), suitable for connecting various circuits and product applications(Please Choose the appropriate model for your usage).
- High stability, high sensitivity, strong interference capability, free from external electromagnetic interference, special treatment for power frequency interference and common mode interference, to be compatible with all 5~24V power adapters on the market.
- Strong compatibility, through a variety of non-metallic containers, such as plastic, glass, ceramics and other containers, the sensing distance can reach 20mm
- liquid, powder, particles can be detected.
- Open collector output mode, wide voltage range (5~24V), suitable for connecting various circuits and product applications.
Conclusion
By our suggestions above, we hope that you can found Wg04f00839 Ge Washer Water Level Switch for you.Please don’t forget to share your experience by comment in this post. Thank you!