Top 10 Rzr Turbo Clutch Cooling

Out in the extreme conditions of the sand dunes it has become commonplace to remove the belt covers in a desperate attempt to prevent belt failures. While removal of the cover does help with belt failures, the increased contact with the sand leads to premature clutch wear and failure. This is why we adapted “THE BLOW HOLE” to fit the UTV market. UTV’s place extreme loads on their clutches and belt which builds extreme heat. This heat is your enemy. It leads to premature wear on your clutches, and complete belt failure. If you have ever had to change a belt then you know this is the last thing you want to be doing on the trail or out on the sand. “THE BLOW HOLE” for UTV’s places a high output auxiliary fan in the cooling ducts of your clutch housing. It dramatically reduces ultimate temperatures generated in the clutch system and also speeds cooling of the clutch housing when traveling at lower speeds between high load events. Plug and Play with OEM connectors, and no cutting or drilling of stock components.

This Attwood Turbo 4000 Series II In-Line Blower provides outstanding ventilation airflow for areas such as engine compartments, galleys, bilges, and heads. It features a patented, in-line design and the 5-blade fan maximizes airflow and efficiency. The blade sweep and pitch are engineered for a high lift coefficient, which results in increased airflow speed for optimized ventilation. It matches the airflow of competitive in-line blowers with significantly reduced noise output. For added durability, it has an engineered plastic housing that resists deformation during installation, and prevents blade-to-housing interference. No other bilge blowers in the industry provide such powerful system output at such low power input in a compact size. System airflow exceeds older-style in-line blowers by as much as 25 percent. It is also up to four times more efficient than competitive blowers as it draws up to 40 percent fewer amps. This blower is marine ignition protected and has built-in mounting feet that permit easy vertical or horizontal installation. This 12-volt, water-resistant white blower is intended for use with 4-inch interior diameter ventilation hose. It installs with #10 fasteners. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing of the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

NEW 12V In-Line Air Blower Hi-Flow Capacity 270CFM, Suits 4″ Diameter Hose Included: 12v In-Line Blower Set of Installation and Operating Instructions Product Description This product is a 100% Brand New Beware of inferior non-genuine products on the market that claim to be just as good Provides ventilation for engine compartments, galleys, bilges and heads Hi-Flow 270 CFM capacity Up to 25% more efficient than conventional in-line blowers White ABS plastic construction with built-in molded mounting brackets Corrosion proof design and water resistant motor casing for use in the marine environment Hose connections each end, for use with 4″ diameter blower hoses Easy to mount – Can be mounted vertically or horizontally Installation and Operating Instructions Included! Does not include mounting screws For intermittent use only Specifications Voltage: 12V DC Flow capacity: 270 CFM (Cubic Feet per minute) Current Draw: 6 Amp Draw NOTE: These In-Line blowers are a genuine quality product – Don’t settle for inferior products on the market.

Out in the extreme conditions of the sand dunes it has become commonplace to remove the belt covers in a desperate attempt to prevent belt failures. While removal of the cover does help with belt failures, the increased contact with the sand leads to premature clutch wear and failure. This is why we adapted “THE BLOW HOLE” to fit the UTV market. UTV’s place extreme loads on their clutches and belt which builds extreme heat. This heat is your enemy. It leads to premature wear on your clutches, and complete belt failure. If you have ever had to change a belt then you know this is the last thing you want to be doing on the trail or out on the sand. “THE BLOW HOLE” for UTV’s places a high output auxiliary fan in the cooling ducts of your clutch housing. It dramatically reduces ultimate temperatures generated in the clutch system and also speeds cooling of the clutch housing when traveling at lower speeds between high load events. Plug and Play with OEM connectors, and no cutting or drilling of stock components.

Product Features:
10ft wiring harness, 2 sets of connectors to light fixtures
illuminated on/off toggle switch – can easily turn on/off the lights.
Inline blade fuse & relay – multiple safety protection.
Note:
Maximum Wattage: 180W; Max Ampere: 15A
Operating Voltage: 12V DC Power
Please finish the installation by professionals or install the wiring harness under the guidance of professionals.

Out in the extreme conditions of the sand dunes it has become commonplace to remove the belt covers in a desperate attempt to prevent belt failures. While removal of the cover does help with belt failures, the increased contact with the sand leads to premature clutch wear and failure. This is why we adapted “THE BLOW HOLE” to fit the UTV market. UTV’s place extreme loads on their clutches and belt which builds extreme heat. This heat is your enemy. It leads to premature wear on your clutches, and complete belt failure. If you have ever had to change a belt then you know this is the last thing you want to be doing on the trail or out on the sand. “THE BLOW HOLE” for UTV’s places a high output auxiliary fan in the cooling ducts of your clutch housing. It dramatically reduces ultimate temperatures generated in the clutch system and also speeds cooling of the clutch housing when traveling at lower speeds between high load events. Plug and Play with OEM connectors, and no cutting or drilling of stock components.

The HyperX Pulse fire Core is a comfortable RGB Gaming Mouse featuring the pixel 3327 Optical sensor for DPI settings up to 6, 200 and precise, smooth tracking without hardware acceleration. The ergonomically-designed mouse with symmetrical shape fits palm and claw grips and has textured sides for a no-slip grip. Gaming-grade switches output crisp Tactile feedback rated for 20 million clicks. Customize lighting, DPI settings, and macros for 7 programmable buttons with HyperX NGenuity software.

This Attwood Turbo 3000 Series In-Line Blower provides outstanding ventilation airflow for areas such as engine compartments, galleys, bilges, and heads. It features a patented, in-line design and the 5-blade fan maximizes airflow and efficiency. The blade sweep and pitch are engineered for a high lift coefficient, which results in increased airflow speed for optimized ventilation. No other bilge blowers in the industry provide such powerful system output at such low power input in a compact size. System airflow exceeds older-style in-line blowers by as much as 25 percent. It is also up to four times more efficient than competitive blowers as it draws up to 40 percent fewer amps. This blower is marine ignition protected and has built-in mounting feet that permit easy vertical or horizontal installation. This 12-volt, white blower is intended for use with 3-inch interior diameter ventilation hose. It installs with #10 fasteners. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing of the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

Brand new radiator cooling fan blade for universal use. It is good for stock cooling, perfect for turbo applications. Easy direct installation, require no modification. Instruction is not included. Professional installation is highly recommended.

This quality, USA made belt removal tool to makes it easy to change a belt either in the field or at your shop. A must have for every on-board tool kit.