Top 10 Regulated Heating Element

Feature

• NON OEM REPLACEMENT FOR WHIRLPOOL / KENMORE Clothes Dryer Heating Element – 3387747,This item is rated at 5400 Watts/240 Volts and has 2 5/16″ terminals.
• Designed to fit specific Whirlpool manufactured dryer models including Amana, Jenn Air, Kenmore, Magic Chef, and Maytag , Compatible With Part # 3387747, 80003, 8527865, 279769, AP2947033, AP6008281 & PS344597, PS117414.
• This heating element fits many Whirlpool-built dryers under the brand names of Whirlpool, Whirlpool Gold, Kenmore, Kenmore Elite, Catalyst, Duet, Duet HT, KitchenAid, KitchenAid Ensemble, among others. It typically fits dryers which have a 27″ cabinet (measured side to side) and/or which have the lint filter located on the inside of the dryer door (as opposed to the top of the cabinet). Fits Kenmore 90-series dryers.
• Dryers pull air from outside the unit and blow it through a coiled wire heating element into the dryer drum. As the drum spins, hot air regulated by a thermostat passes over, under, and around wet clothes to dry them. A dryer that tumbles the clothes while blowing cool air could have a damaged heating element that needs replacing.
• When this part fails, you may experience the following symptoms: Electric Dryer No Heat ,How to test: Measure for continuity, replace if open.

Feature

• NON OEM REPLACEMENT FOR WHIRLPOOL / KENMORE Clothes Dryer Heating Element – 3387747,This item is rated at 5400 Watts/240 Volts and has 2 5/16″ terminals.
• Designed to fit specific Whirlpool manufactured dryer models including Amana, Jenn Air, Kenmore, Magic Chef, and Maytag , Compatible With Part # 3387747, 80003, 8527865, 279769, AP2947033, AP6008281 & PS344597, PS117414.
• This heating element fits many Whirlpool-built dryers under the brand names of Whirlpool, Whirlpool Gold, Kenmore, Kenmore Elite, Catalyst, Duet, Duet HT, KitchenAid, KitchenAid Ensemble, among others. It typically fits dryers which have a 27″ cabinet (measured side to side) and/or which have the lint filter located on the inside of the dryer door (as opposed to the top of the cabinet). Fits Kenmore 90-series dryers.
• Dryers pull air from outside the unit and blow it through a coiled wire heating element into the dryer drum. As the drum spins, hot air regulated by a thermostat passes over, under, and around wet clothes to dry them. A dryer that tumbles the clothes while blowing cool air could have a damaged heating element that needs replacing.
• When this part fails, you may experience the following symptoms: Electric Dryer No Heat ,How to test: Measure for continuity, replace if open.

Feature

• Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
• Be able to connect with refrigeration and heating equipment at the same time.
• Easily calibrated.
• Can display in Centigrade or Fahrenheit.
• Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.

Feature

Feature

• [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
• [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
• [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
• [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
• [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.

Feature

• ????????【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
• ????????【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
• ????????【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
• ????????【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
• ????????【Term of service】Purchase products and get a one-year warranty.

Feature

Feature

Feature

• Plug and play design, easy to use
• Dual relay output, be able to connect with refrigeration and heating equipment at the same time
• Support reading with Centigrade or Fahrenheit unit
• Maximum output load: 1100W(110V)
• Dual display window, be able to display measured temperature and set temperature at the same time

Feature

• Twice the Power: Heat water faster with our 1800-watt water heater and within minutes the water (About 5 gallons) will be noticeably warmer. (Warning: – When heated, it is prohibited to put a hand in the water to test the temperature, one needs to always unplug first before touching the water – It is required to fully immerse the heater in water to avoid any potential fire hazard).
• Rust Proof Stainless Steel Guard: The protective guard ensures no direct exposure to the heating element by people or pets. Heat dissipates to the water faster by flowing through the holes in the guard.
• Easy to Use: Fully submerge the UL 499 Standard certified heater in a bucket, small tub or trough of water and plug into a grounded 120v plug. You can submerge the handle and cord. Feel the difference in a few minutes!
• Widely Application: The immersion water heater can be used in water, especially fit for heating water in large size container like bucket, basin, bath tub, mini inflatable swimming pool, etc
• For any Cold Weather Application: Heat your farm animals’ water, your tiling water on the job site, car wash bucket, pail of bath water in a tiny home or camper, window washing water and more! WARNING: Remove the heater before touching the water and please do not continuously use for over 4 hours!