Top 10 Plate Exchanger Hvac Cooling

0
924 reviews analysed

1. Brazed Plate Heat Exchanger Copper/SS316L 3"x8" 10-40 Plates 3/4" MPT Floor Heating, Water Heating, Snow Melting (BL14-16D)

Brazed Plate Heat Exchanger Copper/SS316L 3"x8" 10-40 Plates 3/4" MPT Floor Heating, Water Heating, Snow Melting (BL14-16D)

Feature

Description

Size:BL14-16D

Built with high quality stainless steel 316L and 99.9% copper, this model produces a counter-current flow to maximize heat efficiency.

This product is highly efficient due to the corrugated plates which produce a high, turbulent flow in a true counter-current direction. With their compact size and reduced material content, they can be the most economical heat transfer choice.

Applications
Domestic Hot Water Heating
Central Heating
Floor Heating
Driveway Snow Melting
Radiator Heating
Heating and Cooling HVAC Installation
Solar Heating

2. Mophorn Plate Heat Exchanger 5 x 12 Inch 20 Plate Water to Water Heat Exchanger Stainless Steel Heat Exchanger 1 Inch MPT Ports 80,000 BTU (20 Plate)

Mophorn Plate Heat Exchanger 5 x 12 Inch 20 Plate Water to Water Heat Exchanger Stainless Steel Heat Exchanger 1 Inch MPT Ports 80,000 BTU (20 Plate)

Feature

Description

The brazed plate heat exchanger has a simple operating principle. Based on the plate and nozzle orientation, each fluid passes through alternative channels within the heat exchanger. An extremely high heat transfer coefficient is attained due to the flow characteristics in each channel. A specially design and test result in higher heat transfer and reduction of the amount of deposits inside the unit.

Our Water To Water Brazed Plate Heat Exchangers are used for transferring heat from one hot water source to another without mixing the two different water sources. They are good for preheating water to water heaters and for transferring heat from an outdoor furnace or solar system to an indoor boiler. Other uses for them include transferring heat from hot oil or cooling milk off a milk pipeline.

Superiority

“Herring bone” plate pattern increases heat transfer area and improves efficiency.

Compact design allows for more flexibility in installation.

Heavy-gauge top and bottom plates protect the unit from corrosion and accidental damage.

Applications

The 20-plate brazed plate heat exchangers are ideal for using with outdoor wood furnaces/boilers, radiant floor heating projects, plumbing systems, snowmelt systems, swimming pools, domestic water applications, HVAC and refrigeration systems, solar systems, oil cooling and other liquid to liquid heat transfer applications.

Notice

1. Not to be used for transferring steam!

2. Vertical installation is recommended to minimize sediment build-up and reduce maintenance.

3. For any type of project, installing a Y-strainer at the heat exchanger inlet is recommended to reduce fouling and extend the lifespan of the unit.

4. Connect the pipes in a manner where liquids move in a counter-flow direction -this will maximize the heat transfer.

3. Brazed Plate Heat Exchanger Stainless Steel SS316L 4"x12" 20 Plates 1" MPT 250,000 BTU/hr Hydronic Heating

Brazed Plate Heat Exchanger Stainless Steel SS316L 4"x12" 20 Plates 1" MPT 250,000 BTU/hr Hydronic Heating

Feature

4. 350,000 BTU/hr: 30-Plate Heat Exchanger, 1" MNPT ports, 4-1/4" x 12"

350,000 BTU/hr: 30-Plate Heat Exchanger, 1" MNPT ports, 4-1/4" x 12"

Feature

Description

Brazetek Plate Heat Exchanger is designed for use in a variety of liquid-to-liquid heat transfer applications, where a reliable, efficient and compact heat exchanger is needed. Specs: Flow Rate: 40 GPM max. Connections: 1″ Male Threaded Dimensions: 4.25″ x 12.12″ x 3.17″ Max BTU output: up to 350,000 BTU/hr

5. Mophorn Plate Heat Exchanger 5 x 12 Inch 50 Plate Water to Water Heat Exchanger Stainless Steel Heat Exchanger 1 Inch FPT Ports (50 Plate)

Mophorn Plate Heat Exchanger 5 x 12 Inch 50 Plate Water to Water Heat Exchanger Stainless Steel Heat Exchanger 1 Inch FPT Ports (50 Plate)

Feature

Description

The brazed plate heat exchanger has a simple operating principle. Based on the plate and nozzle orientation, each fluid passes through alternative channels within the heat exchanger. An extremely high heat transfer coefficient is attained due to the flow characteristics in each channel. A specially design and test result in higher heat transfer and reduction of the amount of deposits inside the unit.

Our Water To Water Brazed Plate Heat Exchangers are used for transferring heat from one hot water source to another without mixing the two different water sources. They are good for preheating water to water heaters and for transferring heat from an outdoor furnace or solar system to an indoor boiler. Other uses for them include transferring heat from hot oil or cooling milk off a milk pipeline.

Superiority

“Herring bone” plate pattern increases heat transfer area and improves efficiency.

Compact design allows for more flexibility in installation.

Heavy-gauge top and bottom plates protect the unit from corrosion and accidental damage.

Applications

The 50-plate brazed plate heat exchangers are ideal for using with outdoor wood furnaces/boilers, radiant floor heating projects, plumbing systems, snowmelt systems, swimming pools, domestic water applications, HVAC and refrigeration systems, solar systems, oil cooling and other liquid to liquid heat transfer applications.

Notice

1. Not to be used for transferring steam!

2. Vertical installation is recommended to minimize sediment build-up and reduce maintenance.

3. For any type of project, installing a Y-strainer at the heat exchanger inlet is recommended to reduce fouling and extend the lifespan of the unit.

4. Connect the pipes in a manner where liquids move in a counter-flow direction -this will maximize the heat transfer.

6. Mophorn Plate Heat Exchanger 5x 12 Inch 60 Plate Water to Water Heat Exchanger Stainless Steel Heat Exchanger 1.25 Inch MPT Ports (60 Plate)

Mophorn Plate Heat Exchanger 5x 12 Inch 60 Plate Water to Water Heat Exchanger Stainless Steel Heat Exchanger 1.25 Inch MPT Ports (60 Plate)

Feature

Description

The brazed plate heat exchanger has a simple operating principle. Based on the plate and nozzle orientation, each fluid passes through alternative channels within the heat exchanger. An extremely high heat transfer coefficient is attained due to the flow characteristics in each channel. A specially design and test result in higher heat transfer and reduction of the amount of deposits inside the unit.

Our Water To Water Brazed Plate Heat Exchangers are used for transferring heat from one hot water source to another without mixing the two different water sources. They are good for preheating water to water heaters and for transferring heat from an outdoor furnace or solar system to an indoor boiler. Other uses for them include transferring heat from hot oil or cooling milk off a milk pipeline.

Superiority

“Herring bone” plate pattern increases heat transfer area and improves efficiency.

Compact design allows for more flexibility in installation.

Heavy-gauge top and bottom plates protect the unit from corrosion and accidental damage.

Applications

The 20-plate brazed plate heat exchangers are ideal for using with outdoor wood furnaces/boilers, radiant floor heating projects, plumbing systems, snowmelt systems, swimming pools, domestic water applications, HVAC and refrigeration systems, solar systems, oil cooling and other liquid to liquid heat transfer applications.

Notice

1. Not to be used for transferring steam!

2. Vertical installation is recommended to minimize sediment build-up and reduce maintenance.

3. For any type of project, installing a Y-strainer at the heat exchanger inlet is recommended to reduce fouling and extend the lifespan of the unit.

4. Connect the pipes in a manner where liquids move in a counter-flow direction -this will maximize the heat transfer.

7. BestEquip Heat Exchanger 316L 5 x 12 Inch 60 Plates Brazed Plate Heat Exchanger 1"MPT Heat Exchanger ZL95A-42 for Heating

BestEquip Heat Exchanger 316L 5 x 12 Inch 60 Plates Brazed Plate Heat Exchanger 1"MPT Heat Exchanger ZL95A-42 for Heating

Feature

Description

Brazed Plate Heat Exchanger 60 Plate Heat Exchanger

Our brand new heat exchanger features a compact & lightweight body, offering excellent thermal performance, and 316L stainless steel material can ensure its long life, so it is perfect for Solar heating, Oil unit heat recovery Engine cooling, evaporation and condensing, etc.

High Thermal Efficiency
Energy Optimized
Robust Construction
Compact Design

key Features

Excellent Thermal Performance

Extremely efficient herringbone construction for maximum heat transfer.

Low Energy Consumption

Low energy consumption due to the very low-pressure drop over the heat exchanger.

316L Stainless Steel

316L stainless steel applied is highly resistant to corrosion, reliable and long life.

Dedicated MNPT Ports

Four Thickened 1″ MNPT ports for your easier installation.

Compact & Flexible

The footprint can be as little as one-tenth that of a shell & tube heat exchanger, and its compact size means it also offers greater system design freedom.

Wide  Application

Suitable for the HVAC industry, dairy/food/beverage industry, refrigeration industry, etc.

Specifications

Model: ZL95A-42
Material: 316L +Copper
Ports: 1″ MNPT
Plate Quantity: 60
Design Pressure(Max):3.0 Mpa
Test Pressure:(Min):4.5 Mpa
Design Temp.(℃): Max +225
Design Temp.(℃): Min -196

Dimesion: 27″ x10″x16″
Package Content
1 x Heat Exchanger
1 x A Pair of Hoops

8. BestEquip Heat Exchanger 40 Plates Brazed Plate Heat Exchanger 2" FNPT 316L Heat Exchanger ZL95B-40D for Heating

BestEquip Heat Exchanger 40 Plates Brazed Plate Heat Exchanger 2" FNPT 316L Heat Exchanger ZL95B-40D for Heating

Feature

Description

Brazed Plate Heat Exchanger 40 Plate Heat Exchanger
Our brand new heat exchanger features a compact & lightweight body, offering excellent thermal performance, and 316L stainless steel+99.9% copper material can ensure its long life, so it is perfect for Solar heating, Oil unit heat recovery Engine cooling, evaporation and condensing, etc.
High Thermal Efficiency
Energy Optimized

Robust Construction

Compact Design

key Features

Excellent Thermal Performance

Extremely efficient herringbone construction for maximum heat transfer.

Low Energy Consumption

Low energy consumption due to the very low-pressure drop over the heat exchanger.

316L Stainless Steel

316L stainless steel applied is highly resistant to corrosion, reliable and long life.

Dedicated FNPT Ports

Four Thickened 2″ FNPT ports for your easier installation.

Compact & Flexible

The footprint can be as little as one-tenth that of a shell & tube heat exchanger, and its compact size means it also offers greater system design freedom.

Wide  Application

Suitable for the HVAC industry, dairy/food/beverage industry, refrigeration industry, etc.

Specifications

  • Model: ZL95B-40D
  • Material: 316L +99.9% Copper
  • Ports: 2″ FNPT
  • Plate Quantity: 40
  • Design Pressure(Max):3.0 Mpa
  • Test Pressure:(Min):4.5 Mpa
  • Design Temp.(℃): Max +225
  • Design Temp.(℃): Min -196
  • Dimesion: 27″ x 10″ x 20″

    Package Content

  • 1 x Heat Exchanger
  • 1 x A Pair of Hoops

  • 9. BestEquip Heat Exchanger 5"x12" 80 Plates Brazed Plate Heat Exchanger 316L 1 1/4" MPT Heat Exchanger EATB25 Beer Wort Chiller for Hydronic Heating

    BestEquip Heat Exchanger 5"x12" 80 Plates Brazed Plate Heat Exchanger 316L 1 1/4" MPT Heat Exchanger EATB25 Beer Wort Chiller for Hydronic Heating

    Feature

    Description

    Brazed Plate Heat Exchanger 80 Plate Heat Exchanger
    Our brand new heat exchanger features a compact & lightweight body, offering excellent thermal performance, and 316L stainless steel +99.9% copper material can ensure its long life, so it is perfect for Solar heating, Oil unit heat recovery Engine cooling, evaporation and condensing, etc.

      High Thermal Efficiency
      Energy Optimized

      Robust Construction

      Compact Design

    key Features

    Excellent Thermal Performance

    Extremely efficient herringbone construction for maximum heat transfer.

    Low Energy Consumption

    Low energy consumption due to the very low-pressure drop over the heat exchanger.

    316L Stainless Steel

    316L stainless steel applied is highly resistant to corrosion, reliable and long life.

    Dedicated MNPT Ports

    Four Thickened 1 1/4″ MNPT ports for your easier installation.

    Compact & Flexible

    The footprint can be as little as one-tenth that of a shell & tube heat exchanger, and its compact size means it also offers greater system design freedom.

    Wide  Application

    Suitable for the HVAC industry, dairy/food/beverage industry, refrigeration industry, etc.
    Specifications

      Model: EATB25
      Material: 316L + 99.9%Copper
      Ports: 1/ 1/4″ MNPT
      Plate Quantity: 80
      Design Pressure(Max):3.0 Mpa

      Test Pressure:(Min):4.5 Mpa

      Design Temp.(℃): Max +225

      Design Temp.(℃): Min -196
      Dimesion: 14″ x 7″ x 15″

    Package Content

      1 x Heat Exchanger
      1 x A Pair of Hoops

    10. BestEquip Heat Exchanger 5"x12" 20 Plates Brazed Plate Heat Exchanger 316L 1 1/4" MPT Heat Exchanger B3-28 Beer Wort Chiller for Hydronic Heating

    BestEquip Heat Exchanger 5"x12" 20 Plates Brazed Plate Heat Exchanger 316L 1 1/4" MPT Heat Exchanger B3-28 Beer Wort Chiller for Hydronic Heating

    Feature

    Description

    Brazed Plate Heat Exchanger 20 Plate Heat Exchanger
    Our brand new heat exchanger features a compact & lightweight body, offering excellent thermal performance, and 316L stainless steel +99.9% copper material can ensure its long life, so it is perfect for Solar heating, Oil unit heat recovery Engine cooling, evaporation and condensing, etc.
    High Thermal Efficiency
    Energy Optimized

    Robust Construction

    Compact Design

    key Features

    Excellent Thermal Performance

    Extremely efficient herringbone construction for maximum heat transfer.

    Low Energy Consumption

    Low energy consumption due to the very low-pressure drop over the heat exchanger.

    316L Stainless Steel

    316L stainless steel applied is highly resistant to corrosion, reliable and long life.

    Dedicated MNPT Ports

    Four Thickened 1 1/4″ MNPT ports for your easier installation.

    Compact & Flexible

    The footprint can be as little as one-tenth that of a shell & tube heat exchanger, and its compact size means it also offers greater system design freedom.

    Wide  Application

    Suitable for the HVAC industry, dairy/food/beverage industry, refrigeration industry, etc.
    Specifications
    Model: EATB25
    Material: 316L +99.9% Copper
    Ports: 1 1/4″ MNPT
    Plate Quantity: 20
    Design Pressure(Max):3.0 Mpa

    Test Pressure:(Min):4.5 Mpa

    Design Temp.(℃): Max +225

    Design Temp.(℃): Min -196
    Dimesion: 14″ x 7″ x 5″
    Package Content
    1 x Heat Exchanger
    1 x A Pair of Hoops

    Conclusion

    By our suggestions above, we hope that you can found Plate Exchanger Hvac Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!

    Home Previews
    Logo
    Enable registration in settings - general