623 reviews analysed
1. Dash Cam Hardwire Kit Mini USB Hard Wire Car Charger Cable Kit 12V to 5V, with Add-a-Circuit Fuse TAP Holder Mini/Low Profile/Standard ATO Blade Dual Protect Adapter
- Input Range: DC 12~24V Output Voltage: DC 5V, Output current: 2A Working Temperature: -40~ 160 Degree F
- The package come with 3 DUAL-SLOT fuse holder, mini, low profile mini and Standard ATO. 3 types, suit for most cars on the market
- DC Output Over Current Protection. DC Output Short Circuit Protection
- 24 Hours Surveillance: The vehicle hard-wire kit connect to car battery or fuse box power, can realize continuous power supply for 24 hours. It can keep powered on even car turned off
- Low Voltage Protecting: With function of auto detect battery voltage and low voltage protecting, it can auto cut power output when it’s lower than 11.6V or 23.5V, make sure the vehicle can start normally
2. Meknic SV-PC01 Dash Cam Hardwire Kit with Battery Drain Protection System,2A Dash Cam Hardwire Fuse Kit For Car DVR Camera Or GPS Power Supply-Installation Manual Include (Mini USB)
- ✅ Meknic Dash Cam Hardwire Fuse Kit for car DVR recorder that Use Right Elbow Angle Mini USB,24 Hour Surveillance and Protects Against Battery Dying
- ✅ No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. Simply piggy backs from car fuse box socket for Meknic Car Dash Cam Hardwire Fuse Kit
- ✅ Meknic Hardwiring Kit Use a Fuse Tap or Wire Tap to Draw Power From Fuse Block Or Wire, No damage to the original circuit of the car
- ✅ Meknic Cam Hardwire kit With low voltage protection function, protect car’s battery, 12V-11.2V(Cut Off Automatically) 24V-23.2V(Cut Off Automatically) to stop your car DVR working automatically
- ✅ Warranty: The company offers one year warranty and 100% satisfaction guarantee and 30-day, hassle-free return policy for Meknic Car Dash Cam Hardwire Fuse Kit.
3. SHISHUO Dash Cam Hardwire Kit – Mini USB and Micro USB Port 3.5m Cable with LP Mini/Mini/ATO/Micro2 Fuse, 12V to 24V Input, 5V Output for Dash Cam GPS Sat-Nav with Battery Drain Protection
- 3.5m hardwire kit for dash cam or other device powered by Mini USB port and Micro USB port, 5V/1.5A steady output, voltage input supports from 12V-24V
- Comes with Low-Profile Mini, Mini, ATO (Regular), and Micro2 fuse adapter, suitable for most cars. Leads come with protective sleeve to cover the crimps
- Make parking monitor for dash cams (should the device support) available, keeps it powered even after engine off
- Battery drain protection will cut off the power once the input voltage drops to under 11.6V (23.2V for 24V input), leaving enough power to ignite the engine
- 2-year warranty from SHISHUO. Worry free aftersales customer services.
SHISHUO Dash Cam Hardwire Kit – Keep your dash cam powered even after engine off!
Dash cam product’s parking monitor function will require device been hardwired to car battery, that’s the best reason why you’ll need this hardwire kit!
This hardwire kit comes with 3.5m hardwire cable with Mini USB port and adapter cable to convert to Micro USB port, providing steady 5V/1.5A output. Big voltage input ranging from 12V-24V.
4 fuse adapter available, Low-Profile Mini, Mini, ATO (Regular), and Micro2, suitable for most cars. Each lead has a protective sleeve to cover the crimp, safer and more durable.
Featured with battery drain protection, power will be cut off once the input voltage drops to under 11.6V (23.2V for 24V input), ensure there’s enough power left to ignite the engine.
1* Hardwire cable with Mini USB port
1* Mini USB to Micro USB adapter cable
4* Different types fuse lead
4* Different types fuse adapter
1* Crowbar 15* Cable clips
4. Justech Dash Cam Hardwire Kit 10ft Mini USB/Micro USB Dash Camera Hard Wire Kits 12V-24V to 5V Low Voltage Protection with Mini/Micro/Micro2 Fuse
- Universal Dash Cam Hard Wire Kit：This hardwire kit(micro usb port) with USB micro male to USB mini female adapter cable for micro USB and mini USB dash cam,car DVR recorder ,compatible 12 – 24V vehicles
- Low Voltage Protection Function: 12V-11.6V, 24V-23.6V(Cut Off Automatically), protect car’s battery,ensure the car can start normally
- Easy to install: Simply piggy backs from car fuse box socket with little to no expertise required
- Hardwiring kit use a fuse tap or wire tap to draw power from fuse block or wire, no damage to the original circuit of the car,no need for cigarette lighter to take power
- Comes with Mini/ATS/Micro/Micro2 fuse adapter, suitable for most cars. With anti-interfere magnetic ring,enhance anti-interference capability
The output port is Micro Usb Port（come with a USB micro male to USB mini female adapter cable ）
Voltage input supports from 12V-24V.
Perfect for parking surveillance, freeing up outlets in your vehicle.
Works with Nextbase and others dash cam.
Dash Cam Hardwire Fuse Kit for car DVR recorder ,24 Hour Surveillance and Protects Against Battery Dying.
No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required.
12v battery, when the voltage is lower than 11.6V will automatically power off
24v battery, when the voltage is lower than 23.6V will automatically power off
USB Interface: Mini USB(come with a USB micro male to USB mini female adapter cable )
Low voltage protection: 11.6V/23.6V
Length of Cable:About 3.2 Meter
input power: 12v to 24v
Output power: 5v 2amp
1 x 3.2M Dash Cam Hardwire Kit
1 x USB micro male to USB mini female adapter cable
1 x ATS(standard) Fuse Cable
1 x Micro Fuse Cable
1 x Micro2 Fuse Cable
1 x Mini Fuse Cable
1 x Standard Blade Fuse
1 x Micro Blade Fuses
1 x Micro2 Blade Fuses
1 x Mini Blade Fuses
1 x Anti-Interfere Magnetic Ring(Installed with cable)
5. Dash Cam Hardwire Kit, Micro USB & Mini USB Hard Wire Kit Fuse for Dashcam, Dash Camera Charger Power Cord, （13ft）
- ★【Wide Compatibility】This hardwire kit is suitable for most car models(Voltage between 12-24V). Our hardwire kit Equipped Mini USB and Micro USB ports,works for almost all car mini USB & Micro USB ports device, such as dash cam、mirror cam、GPS navigator and radar detector etc(Not fits for Garmin device)
- ★【24 Hours Surveillance 】 The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.If the voltage of your car battery drops to 11.6V or 23.2V, the regulator will cut off the power,which leaves you with enough power to start your car
- ★【High Secure Standards】Input: 12v – 24v, Output: 5v 2A /Build in Dynamic IC Charge IC & Magnetic ferrite to prevent Electro-Magnetic shock,Low Voltage and Overcharge Protection, Overall 13ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 10ft.
- ★ 【 Package Contents 】Dashboard Camera Hardwire Kit ( mini USB & Micro USB ports) ,Fuse Tap Cable x4 , Installing crowbar x1 ,User Manual,
- ★ 【WARRANTY】45-Day Money Back Guarantee and 24-Month Product Replacement Warranty ， Strict production management mode and high quality material let us to make the warranty
6. VIKEWE Upgraded Dash Cam Hardwire Kit with Mini/Micro USB Port, Battery Drain Protection, Anti-Interfere Magnetic Ring, 12V-24V to 5V Car Dash Camera Charger Power Cord, 5 Fuse Type & Crowbar/Cable
- ❖【Wide Compatibility & 2 Types Port】Our dash cam hardwire kit directly connects the dash camera, GPS navigator or radar detector etc to the car, bus, SUV and most car models. With 2 types port, suitable for different needs at different dash cams and car charger
- ❖【Built-in Smart Device】This hardwire kit with over-heat, over-current and low voltage protection function, it can protect your car’s battery when vehicle battery voltage was drops to 11.6V (12V input) or 23.2V (24V input), the control box will cut off the power, which leaves you with enough power to ignite the engine, and will not damage the battery
- ❖【24 Hours Surveillance】The upgrade hardwire kit connects to car battery or fuse box power, can uninterruptedly supply power for device 7*24. It can keep powered on even car turned off
- ❖【Easy Installation】No need to occupy the car cigarette lighter, just have the vehicle hardwire kit connected to car battery or fuse box power port, route the wire to the device position. Within minutes, you could finish the installation with little or no expertise required ( Installing Crowbar / Cable clips x 15 include）
- ❖【Perfect Parameter】With about 11.5ft (3.5 m) length of Cable / mini USB & micro USB port. Input voltage: 12V-24V Output: 5V/2A (Anti-Interfere Magnetic Ring included – Avoid your car radio will be interfered )
VIKEWE Dash Cam Hardwire Kit – Make Connection Easier
It’s a must-have if you’re using a dash camera, GPS navigator or radar detector in your car or truck etc vehicle. The hardwire kit connects to car battery or fuse box power, can uninterruptedly supply power for device 7*24.
1. Wide Compatibility: This dash cam hardwire kit is perfect for most type of devices and suitable for most vehicle models.
2. Low Voltage Protection: When voltage lower than 11.6 V (12V input) or 23.5 V (24V input), hardwire kit automatically cut off the power. Leaves you with enough power to start your car, and will not damage the battery
3. 24 Hours Surveillance: Our kit can uninterruptedly supply power for device 7*24. Meanwhile, no need to occupy the car cigarette lighter
4. Easy Installation: Just have the vehicle hardwire kit connected to car battery or fuse box power port.
Connector: Mini USB and Micro USB Port (with adapter)
Cable Length: 11.5ft (3.5m)
Hardwire Kit for Dash Cam x1
Mini USB to Micro USB Adapter x 1
Fuse + Fuse Adapter x 5 sets
Anti-Interfere Magnetic Ring x 1
Installing Crowbar x 1
Cable clips x 15
7. Mini USB & Micro USB Dash Cam Hardwire Kit, Car Dash Camera Charger Power Cord with 4 Fuse Tap Cable & Installation Tool, Compatible with Dash Cam, GPS, Radar Detector, All Mini&Micro USB Port Device
- High Compatibility and Multiple Uses: This hardwire kit set is suitable for most car models(Voltage between 12-24V), while the other hardwire kit is just fit for 12V. It is applied to almost all car mini USB and Micro USB device, like dash cam, GPS navigator and radar detector etc.
- One Fits for All: With Mini USB connector and Micro USB converters, the kit is basically fit for all Dash Cams like Rexing, Vantrue, Aukey, Anker, Crosstour, KDLINKS, Auto-Vox, Toguard, ROAV etc, it also comes with most popular fuse tap adapter types including Low-Profile Mini, Mini, ATO(Regular), and Micro2. Use a fuse tap adapter to draw power from fuse block or wire, no damage to the original circuit of the car.
- Low Voltage Protection: It will automatic power off when detected low voltage in case of battery dying, protect car’s battery, below to 11.6V or 23.2V (cut off automatically) to stop your dash camera(car DVR) working automatically.
- Long Cables and 24 HOURS SURVEILLANCE: 15ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 12ft. The Vehicle hard-wire kit connect to fuse box power. It’s not only guaranteed 24 hours working of parking mode, but also save charging port for more device.
- Warranty: We offers one year warranty and 100% satisfaction guarantee and 30-day, hassle-free return policy.
8. SpyTec 10ft Mini USB 12V-24V to 5V Dash Cam Hardwire Kit with Fuse Holder, Low Voltage Protection for Mini USB Dash Cams
- 24 HOURS UNINTERRUPTED POWER SUPPLY: The Dash Cam Hardwire Fuse Kit with Mini USB Bundle has everything you need to hardwire a dash camera to your car’s battery. It creates a new circuit in your fuse box that you can use to power your mini recorder 24 hrs a day. It can keep powered on even car turned off. Works with the best dashcams on the market like A119S, K1S, Zero Edge, DDpai, Goluk and more!
- BATTERY DRAIN PROTECTION SYSTEM: The Dash Cam Hardwire Kit Mini USB is designed to protect your car battery. It will stop charging your dashcam if your car’s battery gets too low. You can use your dash cam Power Supply 24 hours a day without worrying about having to jumpstart your car.
- KEEPS CAR ORGANIZED: The Hard wire Dash Cam Fuse Kit is the easiest way to hardwire your dash camera. It keeps the interior of your car organized. You can string the wires on top of your dashboard, keeping the installation clean and professional. It is also useful to Protect the car against theft when it’s in the parking lot.
- KEEPS 12V OUTLET FREE: The Dashcam Hardware Kit keeps your 12V outlet free, so you can keep your phone charged and power your recorder at the same time. It also means that there’s less RF interference or static when you’re listening to the radio.
- EASY INSTALLATION: Just slip on the Add-A-Circuit Fuse Holder to add a new circuit to your fuse box. Then you can wire the new circuit directly to your dash cameras using the mini USB adapter. Also keeping the original wiring intact. You don’t have to permanently alter your car in any way.
What’s Included : Dash Cam Hardwire Kit – Micro USB10 Amp ATM Mini Blade Fuse Add-A-Circuit Fuse Holder Features : Perfect for: parking surveillance Hardwire kit for dash cameras that use micro USB Works with K1S, Zero Edge, DDpai, Goluk and more!24 hour surveillance Protects against battery dying Less RF interference Keeps 12V outlet free Adds a new electrical circuit to the fuse box Does not alter original wiring Easily installs on the existing circuit Install looks clean and professional Gives power to a number of electronic devices Product Discription: The Dash Cam Hardwire Fuse Kit with Micro USB Bundle has everything you need to hardwire a dash camera to your car’s battery. It creates a new circuit in your fuse box that you can use to power your dash camera 24 hours a day. You can record video in your car continuously without draining the battery on your camera. There’s no point in keeping a dash camera in your car if you don’t have a way to charge the battery. Hardwiring your dash camera to the fuse box gives the camera 24 hours of battery life. If you’re worried about someone breaking into your car when it’s in the parking lot, you can rest assured that your dash camera will always be on and ready to record. Everyone needs to keep their phone charged while they’re driving. The Dash Cam Hardwire Kit keeps your 12V outlet free, so you can keep your phone charged and power your dash camera at the same time. Keeping your 12V outlet free also means that there’s less RF interference or static when you’re listening to the radio. You can play your favourite station without losing the signal.
9. Dash Cam Hardwire Kit, Upgrade Mini USB Hard Wire Charger Power Cord Kit with 4 Fuse Tap Cables for Dash Camera, Car DVR, GPS Navigator, Radar Detectors and More
- Hardwire Kit can be connected with the electric box of the car, and energized 24 hours after the flameout
- Connected ACC to supply the power
- With automatic detection of battery voltage and low voltage protection:when the battery voltage is getting low, It will be automatically disconnected at 11.6V to ensure that the car can start normally（23.5V for the Truck/Bus)
- Wide voltage input: output interface can be customized for all in-vehicle equipment such as recorders, air purifiers, and positioners
- Using unique imported chips, more securiety
Input voltage: 12-36V
Input current: Max 1000MA
No-load output voltage range: 5.0V
Load output voltage range: 4.75-5.0V
Rated output current: 2000MAX
Rated output power: 10W.
Shell plastic material: environmental engineering plastic ABS+PC flame resistance ∪L94V-0
Wire material: environmentally friendly PVC flame resistance UL94V-0
Electronic materials: new inductors\capacitor resistance fuse IC\LED lights
Working temperature: industrial grade (-30 °C—+85*C)
Storage temperature: industrial grade ( -40 ° C – +85 ° C)
Low voltage protection description: The car is automatically powered off below 11.6V, the truck bus is automatically powered off below 23.5V, compatible with large and small cars. [Protection voltage adjustable]
10. Vantrue 10ft Mini USB 12V-24V to 5V Dash Cam Hardwire Kit with Mini/ACS/ATO/Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for Mini USB Dash Cams, GPS Navigator, Radar Detectors
- 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
- 【24/7 Parking Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
- 【Low voltage protection】It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.4V or 22.8V, thus preventing it draining the battery.
- 【Mulitiple uses】Mini USB plug compatible with all mini usb dash cams such as Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices.
By our suggestions above, we hope that you can found Medlou Dash Camera Hard Wire Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!