
947 reviews analysed
1. Century Digital Cooling Thermostat Controller for Cooling Device 40-108°F
Feature
- ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- ✓ VARIETY OF USES: Our thermostat controller can be used for fans and ventilation. Max load 400w or 1000btu for refrigerators and ACs. Easily keep your various environments in their ideal temperature range. This product is NOT for HEATING products.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
Description
The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.
2. 661566 Dishwasher High Limit Thermostat Replacement Part by Blue Stars – Exact Fit For Whirlpool & Kenmore Dishwashers – Replaces WP661566 3371618 W10339474 AP6010246 PS11743423
Feature
- ✅
- MODEL NUMBER: 661566 Dishwasher High Limit Thermostat
- ✅
- EASY TO INSTALL: It is made exactly fit for most top name brands (Whirlpool, KitchenAid, Kenmore, Maytag) and replaces part numbers: 3371618, WP661566VP, W10339474, WP661566
- ✅
- FIT MODELS: 7DU1100XTSQ0, 7DU1100XTSQ1, 7DU1100XTSQ2, 7DU1100XTSQ5, 7DU1100XTSS0, 7DU1100XTSS1, 7DU1100XTSS2, 7DU1100XTSS4, 7DU1100XTSS5, 7DU910PFGB0, 7GU2300XTVQ0, 7GU2300XTVQ1, 7GU2300XTVQ2, 7GU2300XTVQ3, 7GU2300XTVS0, 7GU2300XTVS1, 7GU2300XTVS2, 7GU2300XTVS3, 7GU2455XTSQ0, 7GU2455XTSS0, 7GU3200XTSS0, 7GU3200XTSS1, 7GU3200XTVY0, 7GU3200XTVY2, 7GU3200XTVY4, 7GU3600XTSY0, 7GU3600XTSY1, 7GU3800XTVY0, 7GU3800XTVY2, 7GU3800XTVY3, 7GU3800XTVY5, 7GU3800XTVY6, 7WDF530PAYM0, 7WDT770PAYM, etc.
- ✅
- PREMIUM QUALITY: The replacement part is made from durable high quality material and well-tested by the manufacturer
- ✅
- MONEY-BACK GUARANTEE: For any reason you’re not completely satisfied, you can ask for a replacement or full refund, no questions asked
Description
SPECIFICATIONS
The 661566 Dishwasher High Limit Thermostat acts as a safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
Works with the following models: Kenmore 110773811, Kenmore 110773882, Kenmore 66512093K210, Kenmore 66512413N412, etc.
Replaces part numbers: W3371618, WP661566VP, W10339474, WP661566.
Works with most top name brands: Kenmore, Whirlpool, KitchenAid, Maytag, Amana, Jenn-Air, Estate, Inglis, Magic Chef, Crosley, Roper.
Fixes the following symptoms:
Not drying dishes properly
Will Not Start
Not cleaning dishes properly
Door latch failure
Count on our 661566 Dishwasher High Limit Thermostat Replacement part for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!
If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section or contact us by visiting the Blue Stars LLC storefront — click the “Blue Stars LLC” on a product page to get to the storefront — then click the “Ask a question” link under Further Information. Select your reason, and then tell us about the question.
The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility.
3. WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
Feature
- WE’VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
Description
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)
Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)
Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x WH1436A Temperature controller
1x sensor cable
4. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
5. Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
6. DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
7. bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
Feature
- KEEP TEMPERATURE IN DESIRED RANGE: It’s on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1 and maximum 25.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device your need.
- LONG SENSOR CABLE: 3m/9.8ft. Size of the WATERPROOF probe head: 4mm*20mm
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
- With compressor delay protection function for refrigerating control
Description
This is an AC 110V Fahrenheit Digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.
This controller provides heating and cooling modes and temperature alarm function.
For example:
If you choose heating mode, set control Value to 100°F, set span value to 10°F. The relay will be connected when temp drop to 90°F. The relay will be disconnected when temp reaches 100°F;
If you choose cooling mode, set control Value to 100°F, set span value to 8°F. The relay will be connected when temp reaches 108°F. The relay will be disconnected when temp drops to 100°F
Specification:
1.Power supply for the controller: AC 110V, 50/60Hz
2.Temperature unit: Fahrenheit, Measure range: -4 ~ 220°F
3.Temperature measure resolution: 1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 1 – 25(Max temp span between ON and OFF)
7.Control resolution: 1(Minimum temp span between ON and OFF)
8.Power consumption: less than 3W
9.Relay contact capacity: 10A/250VAC, 10A/110VAC
10.Data retention: Yes
11.Compressor delay protection: YES
12.Product size:8.5*7.5*3.5cm / 3.4*3*1.4in
13.Sensor Cable length: 3m/9.8ft
Package Content:
1x Digital Temperature controller
8. KETOTEK STC-1000 Digital Temperature Controller Digital LED Temperature Controller 110V Thermostat Sensor 2 Relay Output (110V-220V)
Feature
- ►KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It’s on/off control mode.Turn on your device at a degree and turn it off at another degree.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy:±1℃(-50℃~70℃)
- ►WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This stc-1000 temperature controller has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time.(Please kindly note no outlets,wirring needed)
- ►OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water environment,you can use it in home brewing, fridge,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
- ►ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safety guarantee to this temperature controller.
- ►KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICIAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
Description
Technical Parameters
1.Temperature measuring range: -50 ° C ~ 99 ° C
2.Resolution: 0.1 ° C;
3.Accuracy:+- 1° C (-50 ° C ~ 70 ° C);
4.Sensor error delay: 1 minute
5.Power supply: AC/DC 110V
6.Power consumption: <>
7.Sensor: NTC sensor (1PC);
8.Relay contact capacity: Two Relay Cool 10A/250VAC; Heat 10A/250VAC;
9.Ambient temperature: 0 ° C ~ 60 ° C;
10.Storage temperature: -30 ° C ~ 75 ° C;
11.Relative humidity: 20% ~ 85% (No condensate)
12.Sensor length: 1.0m
13.Front Panel Size: 75×34.5mm Product Size: 75×34.5×85 mm Mounting Size: 71x29mm
Package Includes
1 x Temperature Controller
1 x Temperature sensor
1 x Instruction Manual
90 DAY MONEY BACK GUARANTEE
All KETOTEK customers enjoy 90 Day Money Back Guarantee. Customers can return and get refunded in case the purchasing is not satisfactory for any reason. You have no risk to try and we will provide you the best service!
Conclusion
By our suggestions above, we hope that you can found High Temp Thermostat Whirlpool Dishwasher Wdf110pabb5 for you.Please don’t forget to share your experience by comment in this post. Thank you!