The Best Ge 800 Amp Meter Socket With Disconnect

Product Description

The Square D 200 Amp 8-Space 16-Circuit Combination Meter Socket and Main Breaker Load Center is suitable for use as a combination service entrance device (CSED). This unit is ANSI certified and UL listed with a maximum 22,000 AIR. The ringless unit is intended for use as a combination meter socket and main breaker load center. It is suitable for overhead or underground service applications. The unit has feed-through lugs. This CSED is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline CSEDs are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline CSEDs are engineered for fast installation and wire savings.

From the Manufacturer

WARNING: This product can expose you to chemicals including Lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Siemens meter load center combinations feature a 200 Amp rated meter socket combined with a 200 Amp main breaker service disconnect, available branch circuits, and feed thru lugs. The extra circuits allow for outdoor circuits to be wired directly from this panel, saving wire and installation time. Utility acceptace for all metering products varies, so check your local utility for acceptance before installing.

Siemens all new Unit-PAK Metering offers maximum flexibility and ease of installation to meet the service requirements of multiple position metering projects. The outdoor/indoor rated devices are available in 2-6 gang set-ups which consist of a pull section with main lugs or stud terminations and 4/5 jaw meter sockets with tenant main circuit breaker provisions. The units operate on 120/240V AC 1O- 3W systems and are available with either 125 or 200 ampere meter sockets to meet a wide variety of small apartment and commercial building applications. A fifth jaw accessory kit is available for use on 120/208YV AC 1O-3W network systems. The attractive Unit-PAK devices accept overhead or underground service terminations and are designed for wall-hung surface or semi-flush mounting. The devices are factory pre-bussed in a compact enclosure to ensure ease of handling and installation and to maximize wall-space efficiency. Features and ratings include: 1) Siemens’ exclusive 200 ampere/position QS breaker for quicker wiring, 2) Removable knock-out plate for back exit, 3) Mounting rail for wall hanging, 4) UL Listed for Service Equipment, 5) UL Listed for use with 60/75 Degree wire, 6) UL Listed for short circuit ratings up to 100,000 RMS symmetrical amps at 240V AC, 7) Front accessible 4 or 5-jaw sockets with individual ring or ring less type meter covers, 8) All unmetered bus is barbered and sealable to prevent unauthorized access, 9) Fifth jaw field installable at 6 or 9 o’clock, 10) Lever Bypass models, 11) Galvanized steel with electrodeposited paint provides uniform coverage for long-lasting protection and sharp appearance.

Siemens meter main breaker combinations feature a 200 Amp rated meter socket combined with a 200 Amp main breaker service disconnect. Utility acceptace for all metering products varies, so check your local utility for acceptance before installing.

Siemens all new Unit-PAK Metering offers maximum flexibility and ease of installation to meet the service requirements of multiple position metering projects. The outdoor/indoor rated devices are available in 2-6 gang set-ups which consist of a pull section with main lugs or stud terminations and 4/5 jaw meter sockets with tenant main circuit breaker provisions. The units operate on 120/240V AC 1O- 3W systems and are available with either 125 or 200 ampere meter sockets to meet a wide variety of small apartment and commercial building applications. A fifth jaw accessory kit is available for use on 120/208YV AC 1O-3W network systems. The attractive Unit-PAK devices accept overhead or underground service terminations and are designed for wall-hung surface or semi-flush mounting. The devices are factory pre-bussed in a compact enclosure to ensure ease of handling and installation and to maximize wall-space efficiency. Features and ratings include: 1) Siemens’ exclusive 200 ampere/position QS breaker for quicker wiring, 2) Removable knock-out plate for back exit, 3) Mounting rail for wall hanging, 4) UL Listed for Service Equipment, 5) UL Listed for use with 60/75 Degree wire, 6) UL Listed for short circuit ratings up to 100,000 RMS symmetrical amps at 240V AC, 7) Front accessible 4 or 5-jaw sockets with individual ring or ring less type meter covers, 8) All unmetered bus is barbered and sealable to prevent unauthorized access, 9) Fifth jaw field installable at 6 or 9 o’clock, 10) Lever Bypass models, 11) Galvanized steel with electrodeposited paint provides uniform coverage for long-lasting protection and sharp appearance.