Top 9 Ge 150 Amp Main Breaker

The Siemens BL Circuit Breaker is a panelboard mounted, non-interchangeable trip molded case circuit breaker available in 10-125A, 1-, 2-, and 3-pole.  Available in 10KAIC, 22KAIC and 65KAIC interrupting ratings.  Also, available are arc-fault, ground-fault and switching neutral breakers.  Siemens strongly recommends against the use of “used” breakers.  The installation of used breakers in a Siemens panel will void the warranty on the panel.  Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.

Powermod’s core offering of residential meter stacks, type WMM, offers the widest product offering & flexibility in the industry. Each meter stack houses the Quick System features to maximize productivity and minimize labor costs. To further simplify installation, our 225 amp meter stacks feature the QS breaker. The QS breaker adds to the Siemens exclusive feature set in our power mod product line. Benefits and part numbers include: 1) an exclusive side wired design saves wiring space and eliminates difficult “s bends”, 2) no need for costly filler plates – QS 225 amp breaker takes the same space as standard 100 amp QPs, 3) single right hand bend wiring – saves time and wire, 4) provides 100k AIC flexibility from 100 up to 225 amps, 5) 10k to 100k AIC series rating.

Product Description

Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in single or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.

From the Manufacturer

SIEMENS plug in circuit breakers are intended for use in SIEMENS EQ, SIEMENS Ultimate, ITE, and Gould load centers or meter combinations. The double pole SIEMENS breakers may be used in single or 3-phase load centers and are 240V rated. To ensure the warranty on a SIEMENS panel is not voided, the use of SIEMENS breakers is required.

Product description

GE THQL21125 Plug-In Mount Type THQL Feeder Molded Case Circuit Breaker 2-Pole 125 Amp 120/240 Volt AC

From the Manufacturer

This 120/240 volt GE 125 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center and/or used for feeding Sub-Feed Panel Boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.

Powermod’s core offering of residential meter stacks, type WMM, offers the widest product offering & flexibility in the industry. Each meter stack houses the Quick System features to maximize productivity and minimize labor costs. To further simplify installation, our 225 amp meter stacks feature the QS breaker. The QS breaker adds to the Siemens exclusive feature set in our power mod product line. Benefits and part numbers include: 1) an exclusive side wired design saves wiring space and eliminates difficult “s bends”, 2) no need for costly filler plates – QS 225 amp breaker takes the same space as standard 100 amp QPs, 3) single right hand bend wiring – saves time and wire, 4) provides 100k AIC flexibility from 100 up to 225 amps, 5) 10k to 100k AIC series rating.

Product Description

GE circuit breaker, type thql, q-line, standard, 120/240 vac, 80 a, 1 phase, the frame, fixed trip, 800 a trip, 10 ka interrupt, 2 poles, 6 – 1/0 AWG/4 – 1/0 AWG wire, lug terminal, plug in mounting, 60 – 75 deg c, 3.28 in overall length, 2 in overall width, 2.38 in overall depth, thermoset, ansi specified, CSA certified, UL listed, 2 in spacing. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. may be used, when marked to accept, with American switch, arrow Hart, Bryant, general switch, gte, sylvania, most item, Murray, Westinghouse type br, Challenger, Crouse-Hinds. 15 to 30 amp 14 – 8 cu or 12 – 8 AL AWG wire, 35 to 60 amp 8 – 3 cu or 8 – 2 AL AWG wire, 70 to 100 amp 6-1/0 cu or 4 – 1/0 AL AWG wire. Ul listed, Hacr rated. 120/240 volt; 10, 000 air. 1&Quot; per pole (2" TOTAL).

From the Manufacturer

This 120/240 volt GE 80 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center and/or used for feeding Sub-Feed Panel Boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.

Product Description

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.

From the Manufacturer

Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.