947 reviews analysed
1. A1585, 1/3HP Furnace Blower Motor, 115V, 1075RPM, 6.1AMP
Feature
- 1/3HP Direct Drive Furnace Blower Motor, 115V, 1075RPM, 6.1AMP, 3-Speed
- Capacitor (required but not included): 5MFD/370V
- Replaces: Century DL1036
- Emerson 1864
- Grainger 4M098
- MARS 10585
- Fasco D727
- Geteq 3585
- Marathon X002
- Packard 43585
- Rheem W51-13BAA3-01
- Carrier P257-8585
- York S1-FHM3585
- Sleeve bearing, all angle
- RHEEM mounting holes
- 3 Speeds
- 1/2inch extended thru bolts
- 2-1/4inch resilient rings
- Class B insulation
- Single phase, 60 Hz
- Thermal overload protected
- Reversible rotation
- Fan duty, continuous air over
- Open construction
- 36” lead length
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands
- If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
2. A1729, 1/3 HP Condenser Fan Motor 1075RPM, 2.4AMP
Feature
- 1/3HP Outdoor Condenser Fan Motor, 208-230 volt, 1075 RPM, 2.4AMP
- Capacitor (not included): 7.5 MFD/370V
- Replaces: AOS Century FSE1036S, Emerson: 1861, MARS 10729, Fasco D908, GE/Genteq 3729, Packard 43729, Rheem Protech W51-13CJA1-01, Carrier RCD: P257-8729, York Source 1: S1-FHM3729
- Repair video: https://youtu.be/VxEcFCR6TkI In addition, the motor comes with drain plugs on both end-shields. If you install the motor shaft (facing) down, you need to remove the drain plug on the shaft side end-shield. If you install your motor shaft up, you need to remove the plug on the non-shaft end. This will allow moisture and condensation to drain out of the motor
- All Angle, ball bearing
- Rheem mounting holes w/screws installed
- Water slinger on shaft
- Thru-bolt or band mounting
- Double full flatted shaft
- Class B insulation
- Single phase, 60 hertz
- Thermal overload protected
- Fan duty, continuous, air over
- Totally enclosed non-ventilated
- 36 inch leads
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands
- If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
Description
Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find it on millions of HVAC equipment including Carrier, Goodman, Trane and other brands. If you are a distributor, please continue your normal channel to source Broad-Ocean motors. The Amazon venue is intended for contractors, repair technicians, and do-it-yourselfers, who otherwise many not have been adequately served with Broad-Ocean motors.
3. Dayton 6K778 Motor, 1/3 hp, Split PH, 1725 RPM, 115 V
4. MARS – Motors & Armatures 10728 1/4hp 1075rpm, 1 Speed 1.8 Amp Outdoor Condenser Fan Motor
Description
1 speed motor; 1.8 amp; use to replace motor for other popular models; 16.7 pounds; 15 inches in length.
5. Fasco D727 5.6-Inch Direct Drive Blower Motor, 1/3 HP, 115 Volts, 1075 RPM, 3 Speed, 5.9 Amps, OAO Enclosure, Reversible Rotation, Sleeve Bearing
Description
Product description
Fasco D727 1/3Hp 115V 1075Rpm Blower Motor
From the Manufacturer
PSC motor, ideal for blowers and fans used in furnaces and air-conditioners, all angle mount bearings, 1/2-Inch x 5-1/4-Inch shaft, 5mfd/370V Capacitor Needed – Not Included
6. Dial 2202 1/3 hp 115V 2 Speed Permanently Lubricated Copper Wound Motor
Feature
- Resilient end rings ensure a secure fit into the cooler’s mounting bracket
- Can be automatically controlled with a cooler thermostat or with manual wall switch (both sold separately)
- 2 speeds (1140 and 1725 RPM) allow you to control the comfort level
- Motor terminals are easily accessible for connecting the motor cord
- Automatic thermal overload feature protects against overheating
Description
The product is easy to use and highly durable. The product has easy handing. 1/3 hp, 115V, 2 speed motor, 100% copper windings, 1/2 inch shaft diameter, fits 56Z frame motor only.
7. A.O. Smith GF2034 Century Resilient Base Split Phase Electric Motor, 115 Vac, 6.8 A, 1/3 Hp, 1725 Rpm
8. A.O. Smith RB2034 1/3 hp, 1725 RPM, 115 volts, 48 Frame, ODP, Ball Bearing Belt Drive Blower Motor
Description
Split phase motor, 6.0 amps, 60 hertz, auto protector, Ball Bearing, 1/2-Inch x 1-1/2-Inch shaft.
9. New WEG 1.5HP Electric Motor Fan Pump Compressor General purpose 56 frame 3430 rpm 1 phase 115/230VAC
Description
1.5 hp – 56 Frame – 3430rpm – Single Phase – 115 / 208-230volt – 5/8″ shaft diameter – 1.874″ shaft length Please see attached Pics for motor dimensions and frame dimensions Technical Info: Horsepower: 1.5 Amperage: 8.40 fl amps at 230v Phase: One / Single Phase 2 pole Voltage: 115 / 208-230 RPM: 3430 Torque: 2.27lb.ft Base: Reinforced fixed base Frame: 56 Shaft Diameter: 5/8″ Keyed shaft Shaft Length: 1.874″ Rotation: Reversible CW or CCW Rotation Frequency: 60hz Service Factor: 1.00 @ 230v Enclosure: ODP Open Drip Proof (internally fan cooled) Construction: Rolled Steel Overload: Yes – Manual reset button Efficiency: (100%) 68.0 Weight: 40 lb
10. OEM Upgraded Carrier Bryant Payne 1/3 HP 115 Volt Furnace Blower Motor HC41AE117
Description
This is a Brand New OEM Upgraded Carrier Bryant Payne Furnace Blower Motor
Conclusion
By our suggestions above, we hope that you can found Ge 13 Hp 115V Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!