Top 10 Ge 100 Amp Transfer Switch

Product Description

The Square D by Schneider Electric 100 Amp 240 Volt 3 Pole Indoor Not Fusible General Duty Safety Switch is designed for residential and commercial applications where durability and economy are prime considerations. Typical loads are lighting, air conditioning and appliances. This switch is suitable for use as service entrance equipment when equipped with a service grounding kit. The switch is UL listed, File E2875, and meet or exceed the NEMA standard KS1. For more than 100 years the Square D brand safety switch has been the unchallenged leader in the market. We’ve continued our tradition of innovation, developing new features that provide an unsurpassed level of performance, reliability, safety and ease of installation. This tradition has resulted in the Square D brand being preferred two to one over our closest competitor.

From the Manufacturer

WARNING: This product can expose you to chemicals including DINP which is known to the State of California to cause cancer and DIDP which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Non-Fused Emergency Power Transfer Switch 200A, 240V

Siemens double throw switches are intended to transfer loads from one power source to another. All 2 & 3-pole double throw switches are suitable for use as service equipment including non-fusible versions when used in combination with a UL listed circuit breaker or fusible switch. All are UL Listed and both horsepower and load break rated. Switches are rated for use on systems up to 10,000A when protected with Class H fuses or 100,000A when protected with Class R or Class T fuses. They can also be used to connect a single source of power to either of two loads.

Product Description

The Square D by Schneider Electric QO 30/100 Amp 4-Space 8-Circuit Temporary Transfer Generator Panel helps you change from utility power to a standby source with the flip of 2 QO main circuit breakers. The panel is intended for outdoor use to connect to a standby power source for as many as 8 circuits. The ANSI-certified and UL-listed unit features a mechanical interlock to help ensure that only 1 main circuit breaker is in the on position at any time.

From the Manufacturer

WARNING: This product can expose you to chemicals including Lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Product Description

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty and ships in a plain white recyclable box.

Amazon.com

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty.

Siemens double throw switches are intended to transfer loads from one power source to another. All 2 & 3-pole double throw switches are suitable for use as service equipment including non-fusible versions when used in combination with a UL listed circuit breaker or fusible switch. All are UL Listed and both horsepower and load break rated. Switches are rated for use on systems up to 10,000A when protected with Class H fuses or 100,000A when protected with Class R or Class T fuses. They can also be used to connect a single source of power to either of two loads.

UL & CSA compliant. The EZ Generator Switch is a single-circuit 15 Amp, 125-volt transfer switch in the generator position and 20 amp rated in the normal position. It controls heating systems, lighting circuits, convenience outlets, refrigerators, sump pumps, and 120-volt well pumps. We are also compatible with SOLAR SYSTEMS and INVERTERS. The unit is completely pre-wired and comes with 24-inch leads, wire nuts, back box, and directions / wiring diagram to connect to circuit panels or equipment. During a power outage, simply plug your extension cord (12 gauge cord recommended and only the length you need) from your generator into the EZ Generator Switch and place the switch into the ‘Generator’ position. No worrying about back-feeding or messing with breakers. When the power resumes, simply place the EZ Generator Switch back into the ‘Normal’ position. Our switch is Universal and can be converted for both types of generators (bonded or floating neutrals) in less than 2 minutes, in addition we provide full support. Never purchase a transfer switch that has not been tested/approved by UL & CSA

The Reliance Controls CSR202 Easy/Tran Transfer Switch is easy to install and easy to use. It is ideal for controlling single-circuit farm buildings, irrigation systems, community wells, telecommunication substations, traffic signals, commercial garage doors, cell towers, sewer and water lift stations, septic pumps, industrial sump pumps, electric water heaters, electric heat and much more. The transfer switch ensures that you can safely use back up power during a power outage without having to worry about back feeding the utility line. In an emergency situation you might not think to shut off the main power source, the transfer switch makes it so you do not have to worry about that. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.