903 reviews analysed
1. OMorc Desoldering Wick, Solder Sucker & Solder Braid (2.5mm Width, 1.5m Length) – Desoldering Vacuum Pump Solder Removal Tool
Feature
- Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
- Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
- Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
- Compact and Lightweight. Measuring 7.48”X0.79”, the desoldering pump can be used with only one hand, either your right or left hand.
- Solid Construction. The solder sucker has plastic backing to ensure stability.
2. Teenitor Solder Sucker Desoldering Vacuum Pump Solder Removal Tool 3pcs/Pack
Feature
- Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suck
- Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily
- Very sturdy,will worke good to remove existing solder from a circuit board
- Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering
- A must have excellent solder sucker which fits nicely in your tool box
3. AUSTOR 1 Piece Desoldering Sucker and 6 Pieces Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux – Desoldering Vacuum Pump Solder Removal Tool
Feature
- High efficiency solder sucker – the desoldering pump designed with double ring and “vacuum” open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
- Desoldering braid wick with rosin – 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size
- geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
- High quality material – the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
- Wide application – correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
- 7-in-1 solder removal tool – 1pcs solder sucker and 6pcs solder wicks in 3 size
Description
AUSTOR 7 Pieces Solder Sucker & Desoldering Wick kit, including 1 Piece Desoldering Sucker and 6 Pieces Solder Braid Solder Wick
Product instruction
How to Use the Solder Sucker
Product instruction
How to use the solder sucker
First: press down the plunger until it is locked with the sucker.
Second: heat up the solder until it become liquid.
Next: place the solder sucker near to the liquid,then press the button.
Last: repeat this process if needed.
Note
1. Don’t take apart the nylon suction nozzle when you recive the desoldering sucker first time to prevent escapes.
2. Don’t forget to put the black elastic back on the sucker after you pour the scruff out of it, then screw the nylon suction nozzle to ensure the sucker can be normal use.
3. If you find the double sping device no spring pressure when pressing the plunger, check whether the nylon suction nozzle had been screw tightly.
How to use the solder wick
First: place the wick over the solder which you want to remove.
Second: heat the wick and sold area by the soldering iron.
Next: remove the wick once the solder has been absorbed.
Last: cut off the wick you have used, repeat this process if needed.
Specifications
Desoldering Pump
Material: ABS
Length: 206mm
Diameter: 20mm
Solder Wick
Material: Copper with rosin
Wideth: 2.0mm/2.5mm/3.0mm
Length: 1.5m
Diameter: 55mm
Package include
1 * Desodering Pump
2 * Solder Wick 1.5M x 2.0mm
2 * Solder Wick 1.5M x 2.5mm
2 * Solder Wick 1.5M x 3.0mm
Product Warranty
All Austor products supply 45 days money-back & 18-month warranty. Any questions you have, please don’t hesitate to contact us. We will get you back within 24hours.
4. Vastar AD444 Solder Sucker Desoldering Vacuum Pump Solder Removal Tool
5. Timiy Solder Sucker Desoldering Vacuum Pump Solder Removal Tool w Suction Pen 1Set
Feature
- Package Includes: 1 x Solder Sucker + 1 x Suction Pen
- Material: aluminum & plasic
- Solder Sucker Size: 18 x 1.9 cm/ 7.09″ x 0.75″ (L*D)
- Suction Pen Size: 15.1 x 1.25 cm/ 5.94″ x 0.49″ (L*D)
- Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering.
- Special design: right or Left handed design allows easy one-handed use.
Description
Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
6. EVERMARKET(TM) Desoldering Wick, solder braid with 2.5mm Width, 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool – Blue
Feature
- High quality desoldering braid with unique no clean flux and gemetrically- precise weave
- Pure oxygen free copper wire with 0.1″W x 5’L, weight 0.4oz
- Excellent thermal transfer for faster, safer desoldering using lower temperature irons
- High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2″ length x 3/4″ diameter
- Special Design: Right or Left handed design allows easy one-handed use
Description
Get the solder off and replace them with newer ones, which it is very common when soldering, so this desoldering removal tool will be your perfect companion to suck the solder away effectively.
Suck the Solder Away Easily
The solder sucker measures 7.48”X0.79”, which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder away effectively.
Clean the Solder in Detail
2.5mm wide, 1.5m in length and 0.4oz in weight, the solder wick can clean the solder in some small or hard to reach areas. No clean flux, oxygen free copper wire. It will be a great accessory to remove the extra solder.
How to Use the Desoldering Pump
Step 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder.Move the iron out of the way and immediately cover the liquid solder puddle with the pump’s tip. Pull the trigger;
Step 4: Repeat this process if necessary.
How to Use the Solder Wick
Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed
Package Included:
1* Solder Sucker
1* Solder Wick
7. Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
Feature
- 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome.
- 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
8. EVERMARKET(TM) Desoldering Wick, solder braid with 2.5mm Width, 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool,Blue – 2 Packs
Feature
- High quality desoldering braid with unique no clean flux and gemetrically- precise weave
- Pure oxygen free copper wire with 0.1″W x 5’L, weight 0.4oz
- Excellent thermal transfer for faster, safer desoldering using lower temperature irons
- High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2″ length x 3/4″ diameter
- Special Design: Right or Left handed design allows easy one-handed use
Description
Get the solder off and replace them with newer ones, which it is very common when soldering, so this desoldering removal tool will be your perfect companion to suck the solder away effectively.
Suck the Solder Away Easily
The solder sucker measures 7.48”X0.79”, which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder away effectively.
Clean the Solder in Detail
2.5mm wide, 1.5m in length and 0.4oz in weight, the solder wick can clean the solder in some small or hard to reach areas. No clean flux, oxygen free copper wire. It will be a great accessory to remove the extra solder.
How to Use the Desoldering Pump
Step 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder.Move the iron out of the way and immediately cover the liquid solder puddle with the pump’s tip. Pull the trigger;
Step 4: Repeat this process if necessary.
How to Use the Solder Wick
Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed
Package Included:
2* Solder Sucker
2* Solder Wick
9. 3 Pieces Desoldering Suckers Desoldering Wick and 3 Pieces Solder Braid Wick Solder Sucker Desoldering Vacuum Pump Solder Removal Tool
Feature
- Efficient solder sucker: the desoldering pump is designed with double ring and “vacuum” open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
- Quality material: the desoldering pump body is made of quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
- Solder sucker: 3 pieces solder braid wicks in different width, 2.0 mm/ 0.08 inch, 2.5 mm/ 0.098 inch, 3.0 mm/ 0.118 inches, geometrically-precise weave, can be applied to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
- Solder removal tool: 3 pieces desoldering vacuum pumps and 3 pieces solder wicks, practical tools, the desoldering wick absorbs solder, the desoldering pump pulls it away quickly, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts
- Wide application: correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
Description
3 Pieces desoldering suckers desoldering wick and 3 pieces solder braid wick solder sucker desoldering vacuum pump solder removal tool
Features:
Efficient solder sucker:
The desoldering pump designed with double ring and “vacuum” open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.
Wide application:
Correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering.
Specifications:
Quantity: 6 pieces
Material: ABS, sponge and nylon
Solder braid wick size:
Width: 2.0 mm/ 0.08 inch, 2.5 mm/ 0.098 inch, 3.0 mm/ 0.118 inches
Length: 1.5 m/ 4.9 feet
Package includes:
3 x Desoldering suckers
3 x Solder braid wick
Note:
Please allow measurement error.
Winding hazard, please keep away from little kids.
Conclusion
By our suggestions above, we hope that you can found Desoldering Vacuum Pump Solder Removal for you.Please don’t forget to share your experience by comment in this post. Thank you!
