597 reviews analysed
1. GOODTS Dash Cam 1080P FHD Car Camera Recorder 2.45 Inch LCD Screen 170°Wide Angle, Dash Camera for Cars with G-Sensor Loop Recording WDR Motion Detection Night Vision.
Feature
- ????【1080P FULL HD 2.45 INCH DASH CAM】1080P FHD video and a super-wide angle lens captures the whole road in crystal-clear definition. Choose us, we 2.45 inch mini size screen is easy to hide, and won’t obscure or distract your vision while you driving, so that it guards your safe drive.
- ????【EMERGENCY ACCIDENT LOCK】The variable sensitivity G-sensor automatically detects sudden collisions and immediately saves the relevant lens and locks it to the SOS file. This prevents any overlays and thus protects your video evidence. Keep you out of trouble.
- ????【PARKING MONITOR & MOTION DETECTION】Parking mode monitors your car’s surroundings while parking. Dash Cam will automatically power on and start recording if your car is scratched, you could easily find and playback the video. When in standby, Dash Cam will detect whether there is the moving object, and the recording will be auto on if it finds a moving object.
- ????【LOOP RECORDING & 170°WIDE ANGLE】Automatically overwrites the oldest footage to prevent the recording from stopping when the memory card is full(Locked clips won’t be overwritten). 170° wide viewing angle helps you clearly captures more details to reduce video shooting blind area and captures more of the environment. No worry to miss any detail.
- ????【GOOD GOODTS CUSTOMER SERVICE】We have so many years of experience, so we understand your needs. And we are committed to provide you a high-quality and cost-effective Dash CAM J03 from own powerful factory. As a professional seller on Amazon, we are confident that we will not disappoint you. GOODTS offers 7×24 hours customer service, 30 days free return, and 12 months warranty. Quick contact✉: [email protected], every customer is our friend.
2. Vantrue 10ft Mini USB 12V-24V to 5V Dash Cam Hardwire Kit with Mini/ACS/ATO/Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for Mini USB Dash Cams, GPS Navigator, Radar Detectors
Feature
- 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
- 【24/7 Parking Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
- 【Low voltage protection】It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.4V or 22.8V, thus preventing it draining the battery.
- 【Mulitiple uses】Mini USB plug compatible with all mini usb dash cams such as Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices.
3. AUKEY Dash Cam Hardwire Kit with Motion Detection Sensor, Dashboard Camera Hardwire Kit for DR01, DR02, DRA1, DR02 J, DR03 & DR02 D Dual Dash Cameras, and More
Feature
- Dash Cam Upgrade: Maintain automatic monitoring of your vehicle when it’s parked and the ignition is off. Don’t leave your car unprotected
- 360° Protection: The inline sensor detects motion within 2–3m / 6.56–9.84ft in all directions. It instantly triggers the dash camera to capture any activity, and the dash camera automatically stops recording and stands by after 2–3 minutes if no further motion is detected
- Simple Setup: No electrical wiring or tools needed to install this kit. Plugs into the OBD-II DLC port under the dash (in all cars sold within the U.S. since 1996)
- Parking Mode Compatibility: Works with AUKEY DR01, DR02, DR02 D, DR02 J, DRA1 and many other mini-B dash cameras with parking mode (motion detection recording)
- Package Contents: AUKEY PM-YY Dashboard Camera Hardwire Kit, User Manual, 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty Card
Description
Dash Cam Companion
Investing in a dash camera is a smart choice for personal protection and insurance purposes, but most dash cameras power off when the car ignition is switched off, leaving your car unprotected. The AUKEY PM-YY Dashboard Camera Hardwire Kit maintains power supply to your dash camera, solving this problem.
Constant Car Protection
The PM-YY connects your dash camera to your car’s battery so the camera can receive power and record any activity after the ignition is turned off. To minimize battery draw in parking mode (motion detection recording), the inline motion detection sensor only activates the camera if motion is detected (within 2–3m / 6.56–9.84ft), and the camera enters standby again after 2–3 minutes if no further motion is detected. The hardwire kit’s 11.6V cutoff also prevents excessive discharge.
Hassle-Free Setup
Simply plug the connectors of this cable into the OBD-II DLC port of your car’s fuse box and the mini-B port on your camera. Use the 3M adhesive pad to fasten the motion detection sensor to your car’s windshield in seconds. No fuss with fuses or wiring.
Discreet Cable Management
The 10-foot hardwiring cable fits neatly and almost unnoticed in your car, elevating your dash camera to the next level with greater integration and functionality. Also, with a car charger port freed up, you have more ports to charge your devices. This hardwire kit is a small but powerful dash camera accessory for your AUKEY DR01, DR02, DR02 D, DR02 J, and many other dash cameras with mini-B power input port and parking mode.
45-Day Money Back & 24-Month Warranty
All AUKEY products are backed by our 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty.
4. APEMAN Dash Cam Hardwire Kit for C450 Series A, DC 11.5V-40V to 5V Car Charger Power Kit, Build-in G-Sensor and Low Voltage Protection for Dash Cameras
Feature
- Fits for APEMAN C450 Series A – With Mini charging port converters, the kit is basically fit for Mini port Dash Cams or Car Charger like APEMAN C450 Series A
- Compatible 11.5–40V Vehicles – This Hardwire Kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, with wide range of input voltage(Voltage between 11.5-40V), suitable for most of car mini USB device on the market.
- Build-in G-SENSOR – The dash cam automatically shuts down 5 minutes after the car is turned off. At this time, the G-SENSOR in the OBD starts to work (in the monitoring state). Once the car is vibrated, the OBD will be powered on to turn on the recorder. When there is no vibration signal, the driving recorder will automatically shut down after 1 minute, which will save the battery.
- 24 Hours Parking Surveillance – The hard-wire kit connected to OBD-II connector of your car, can uninterruptedly supply power for dash camera for 24 hours. It can even supply Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- Low Voltage Protection – With a smart low voltage protection system, the camera will power off automatically when the battery voltage lower than to 11.5V, thus preventing it draining the battery.
Description
APEMAN Hardwire Kit for Mini USB Dash Cam APEMAN C450 Series A
It’s a must-have if you need 24/7 parking guard with your dash cam. It connects the camera directly to the OBD-II connector of your car under the dash cam for continuous power from the vehicle’s battery. When the car is driving, it can be used replacing the ordinary car charger, and the car ignition will not be powered off.
APEMAN Hardwire Kit is specialized for APEMAN’s Star Dash Cam – C450 Series A or other Mini charging port car recorder.
Specifications:
★ Connector: Mini USB
★ Input Voltage Range: 11.5V-40V
★ Output: 5V /1.5A
★ Working Temperature:-10-60℃
★ Cable Length: 3M
★ Low Voltage Protection: When voltage lower than 11.5, automatically cut off the power
Installation Instruction:
1.Mount your camera where it has full vision of your road
2.Run the wiring towards to the OBD-II connector of your car
3.Hide the wire under the headboard
4.Remove the 3M Sticker of the G-sensor on hardwire kit, then firm to the windshield where close to dash cam.
5.Connect the hardwire kit with the dash cam and power the camera for using.
Warm Tips:
★ If you don’t have experience on installing the hardwire kits for the dash cam, please ask to APEMAN Customer Team for professional help, we are always here to serve you.
5. APEMAN Dash Cam Hardwire Kit for C550, DC 11.5V-40V to 5V Car Charger Power Kit, Build-in G-Sensor and Low Voltage Protection for Dash Cameras
Feature
- Fits for APEMAN C550 – With Mini charging port converters, the kit is basically fit for Mini port Dash Cams or Car Charger like APEMAN C450 C550
- Build-in G-SENSOR – The dash cam automatically shuts down 5 minutes after the car is turned off. At this time, the G-SENSOR in the OBD starts to work (in the monitoring state). Once the car is vibrated, the OBD will be powered on to turn on the recorder. When there is no vibration signal, the driving recorder will automatically shut down after 1 minute, which will save the battery.
Description
For APEMAN DASH CAM C550
Feature:
24/7 parking monitoring – you just plug the harwire kit to OBD-II connector of car battery.
Do not finish car battery – Built with G-sensor, it will automatically power the dash cam and will not run out your battery.
Replace car charger – If you do not have cigarette lighter, just connect this hardwire kit to OBD-II connector.
Specifications: Connector: Mini USB
Input Voltage Range: 11.5V-40V
Output: 5V /1.5A
Working Temperature:-10-60℃
Cable Length: 3M
Low Voltage Protection: When voltage lower than 11.5, automatically cut off the power
Installation: 1.Mount your camera where it has full vision of your road
2.Run the wiring towards to the OBD-II connector of your car
3.Hide the wire under the headboard
4.Remove the 3M Sticker of the G-sensor on hardwire kit, then firm to the windshield where close to dash cam.
5.Connect the hardwire kit with the dash cam and power the camera for using.
If you need any help, please feel free to contact with us.
6. Viofo Bluetooth Remote Control for The A129 Series Dash Cameras
Description
Mount the Bluetooth remote anywhere on your dashboard and with a press of the button, it will save the current file being recorded on the A129 from being overwritten. No more searching for the right button to press on the camera itself while your driving! Comes with manual and 3M adhesive pads. Requires firmware version 1.3 or newer to be installed on the regular Viofo A129 and A129 DUO.
7. Vantrue S1 Dash Cam 10ft Mini USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection
Feature
- 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
- 【24 Hours Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff. The package come with 4 types fuse holder, Mini, ACS, ATO and Micro2 Add , which suit for most cars on the market.
- 【Low voltage protection】With function of auto detect battery voltage and low voltage protecting, it can auto shut off power output when the battery voltage lower than 11.4V or 22.8V, compatible with large and small car, thus preventing it draining the battery.
- 【For Vantrue S1 Use】 Mini USB plug compatible with the Vantrue S1 dash cam.
8. Thinkware TWA-SH THINKWARE Hardwire Kit Cable for THINKWARE Dash Cams | Parking Mode | Impact and Motion Detection | Car Battery Drain Protection System | Alternative Power Supply from Fuse Box
Feature
- Connects the main dash cam unit to the vehicle’s fuse panel (Professional Installation Recommended)
- Enables Parking Surveillance mode with impact and motion detection when the car is parked
- Activates the built-in voltage meter in the main unit which monitors the battery level and automatically shuts off the device if low voltage is detected
- Connecting cable is 9.8 feet (2.98 meters) long
- Hardwiring cable is compatible with all THINKWARE dash cams (except F550)
Description
THINKWARE TWA-SH is a hardwiring cable that connects to your THINKWARE dash camera directly to your vehicle’s fuse panel, which allows the camera’s parking surveillance mode to function while the vehicle’s ignition is turned off. The built-in voltage meter in the main unit will be activated to monitor the battery level. It will automatically shut off the device if the voltage dips below the configurable voltage cut-off level. One-year manufacturer’s warranty: covers units sold at authorized retailers only. Disclaimer: Device is pre-loaded with a firmware and GPS data that are specific for use within the US only. Proper device operation cannot be guaranteed outside of the US.
9. VanTop V9H Dash Cam Hardwire Kit, 11.5ft Mini USB Hard Wire Kit for Dashcam Converts 12V-24V to 5V/2.5A w/Fuse Kit and Installation Tool, Low Voltage Protection for Dash Cameras
Feature
- Upgraded Automatically Detection Device – VanTop V9H hardwire kit will automatically detect the state of the car ignition to start recording video without a manual setting. An upgraded automatically detection device to make it easier to run a dash cam.
- Multiple Security Protection – With low voltage protection, V9H hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.5V (it depending on your vehicle). More security protection like over-current, short-circuit, reverse connection, and overheat.
- 24 Hours Surveillance – With VanTop V9H hardwire kit, the continuous power supply makes parking monitoring function more reliable. Besides, supported by the time-lapse shooting function to maximize the advantages of memory.
- High Compatibility – VanTop V9H hardwire kit works for almost all car mini USB devices, such as dash cam, mirror dash cam, GPS navigator, and radar detector. Specially designed for VanTop H610/H609 mirror dash cam and more VanTop models.
- Easy Installation – You will get 1 x hardwire kit, 4 x fuse taps and blade fuses, 1 x easy pry tool, and 1 x quick guide. Simple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices. TIPS: Please read the quick guide carefully before use.
Description
VanTop V9H Dash Cam Hardwire Kit
Specification
Input Voltage: DC12V/24V
Output Voltage: 5V-2.5A Max
Working Temperature: -40~160°F
Over-current Protection: 2.5A
Low Voltage Protection: 11.6V±0.2/23.5V±0.2
Connector Type: Mini USB
Cable Length: 3.5M/11.5FT
Package List
1 x Hardwire Kit
4 x Fuse Tap
4 x Blade Fuse
1 x Easy Pry Tool
1 x Quick Guide
TIPS
1)We strongly recommend the professional installation of the Hardwire Kit.
2)Please make sure the ignition is off before installing the Hardware Kit.
3)Carefully utilize the tool to test and check the polarity and grounding before confirming the installation.
4)For safety reasons, we strongly recommend that you do not use any fuse slot used by any of your vehicle’s critical components, such as the Air Bags.
Installation Steps
Step 1: Connect the Yellow Wire of the Hardwire Kit with one type of Fuse Taps that your vehicle requires.
Step 2: Connect the Fuse Tap to the positive terminal of your Constant Fuse Slot.
Step 3: Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box. ACC Fuse Slot only has power when the ignition is on.
Step 4: Crimp the Black Wire and screw it down to any non-costed metal bolt/screw in your vehicle to ground it.
Step 5: Connect the Mini USB connector of the Hardwire Kit to the Mini USB input of your Dash Camera, and then the installation is completed.
10. Dash Cam Mirror Mount – Fits Falcon F170HD,Rexing V1, Z-Edge, Old Shark, YI, Amebay,KDLINKS X1,VANTRUE and Most Other Dash Cameras
Feature
- Buy one dash cam, buy one dash cam mirror mount. MUST HAVE for dash cam!
- New 7 different joints kit suitable for most car dash cam on the market, include Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE and other hot selling dash cam.
- Mount your dash cam behind car rearview mirror, provides better drivers’ view. Real 360 degree rotation design, adjust to any angle you want.
- Exclusive 9.70mm ultra-slim design SnakeMount, suitable for most car rear view mirror.100 percent sturdy dash cam mirror mounting solution.
- Heat-resistant. Never fall off the windshield. Never.
Description
AmorTek,Delight Your Ride
Patent Snake Mount for Dash Cam/GPS
9.7mm Ultra-slim body with 5 different joints, suitable for most rear view mirror and most dash cam. Real 360 degree rotation, available to adjust to any angle you want. Environmental silicone rubber pad, anti-slip and anti-shake. Never fall off the windshield like the suction cup holder
Conclusion
By our suggestions above, we hope that you can found Dash Camera Under 20 for you.Please don’t forget to share your experience by comment in this post. Thank you!