The Best Briskheat Heating Blanket

This 24 x 24in (610 x 610mm), 120V SRL silicone rubber heating blanket is moisture, chemical, and radiation resistant with exceptional durability. Suitable for a large range of surfaces like tanks, hoppers, conveyers, silos, and more. The heating element is laminated between two layers of 20mil fiberglass-reinforced silicone rubber, and is grounded to meet NEC 427.23. It has an exposure temperature range of -60°F to 450°F (-51°C to 232°C). The standard power density is 2.5watts/sq. in (0.004watts/sq. mm). The SRL heating blanket has standard 48in (1219mm) length silicone rubber power leads with a bare wire connection. Now CE and CSA approved, and RoHS compliant. Requires temperature controller (sold separately). Material: Fiberglass-Reinforced Silicone Rubber Backing. Dimensions (W x L): 24 x 24in (610 x 610mm). Voltage: 120V. Wattage: 1440. Silicone Rubber Power Leads: 48in (1219mm) Standard Length. Power Density: 2.5w/sq. in (0.004watts/sq. mm). Silicone Density Per Layer: 21.7oz/sq. yd. (736g/sq. m). Exposure Temperature Range: -60°F To 450°F (-51°C To 232°C). Dielectric Strength: Over 2000V. Brisk Heat #: SRL24241.

PBL55F: The PBL55F is an insulated full coverage drum heater specifically designed to fit a 55 gallon drum and encasing it fully in Powerblanket’s patented tough vinyl heating cover. The heater is built for use with 120 volts AC, drawing 3.33 amps thus producing 400 watts. It has a preset thermostat set to maintain up to a maximum 145 ºF / 63 ºC (± 10 ºF/5 ºC). The PBL55F full-coverage drum heaters allow you to safely control the temperature of expensive chemicals and other fluids; it delivers a barrier of directional heat where it’s needed most, the bottom 2/3rds of the drum, while still insulating the top third to help retain the heat – preventing fluids from freezing and maintaining optimal temperatures. This innovative heat-spreading technology insulates, protects and maintains heat in a wide variety of applications. And it’s certified by ETL to UL & CSA safety standards.

This 24 x 36in (610 x 914mm), 120V SRL silicone rubber heating blanket is moisture, chemical, and radiation resistant with exceptional durability. Suitable for a large range of surfaces like tanks, hoppers, conveyers, silos, and more. The heating element is laminated between two layers of 20mil fiberglass-reinforced silicone rubber, and is grounded to meet NEC 427.23. It has an exposure temperature range of -60°F to 450°F (-51°C to 232°C). The standard power density is 2.5watts/sq. in (0.004watts/sq. mm). The SRL heating blanket has standard 48in (1219mm) length silicone rubber power leads with a bare wire connection. Now CE and CSA approved, and RoHS compliant. Requires temperature controller (sold separately). Material: Fiberglass-Reinforced Silicone Rubber Backing. Dimensions (W x L): 24 x 36in (610 x 914mm). Voltage: 120V. Wattage: 2160. Silicone Rubber Power Leads: 48in (1219mm) Standard Length. Power Density: 2.5w/sq. in (0.004watts/sq. mm). Silicone Density Per Layer: 21.7oz/sq. yd. (736g/sq. m). Exposure Temperature Range: -60°F To 450°F (-51°C To 232°C). Dielectric Strength: Over 2000V. Brisk Heat #: SRL24361.