601 reviews analysed
1. Anderson Metals 54048 Brass Tube Fitting, Half-Union, 5/8" Flare x 1/2" Male Pipe
Feature
- Two piece construction – nut and body
- Use with brass tubing
- Standard fittings use short nuts
- Resists mechanical pullout
- Easy to disassemble and can be reassembled many times with no effect on the seal
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
Two piece construction – nut and body. Use with brass tubing. Standard fittings use short nuts. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. -65 degree F to +250 degree F temperature range. Primary uses fuel equipment, plumbing, gases, refrigeration and vacuum. 3/4″-16 and 7/8″-14 Thread size.
2. Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/4" Female Pipe
Feature
- Coupling fitting for connecting two tubes with the same diameter
- Flared tube connection on one side and a female NPT connection on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
This Anderson Metals coupling compression tube fitting is made of brass, has a flared tube connection and a female NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect two tubes of the same diameter in a straight run. It has a flared tube connection on one end and a female National Pipe Taper (NPT) connection on the other, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This coupling compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
3. Joywayus 1/2" Female 3/4" Male Soild Brass Water Tank Connector Theaded Bulkhead Fitting with 2 Rubber Ring Stablizing
Feature
- If you use Garden Hose Thread, please order B07SDCYLS8,and choose 1/2 x 3/4 GHT.
- Notice:The thread size on the title is not the fitting’s OD,please check the size you need before ordering.
- Male thread brass quick connector,female thread inside.Embeded gasket provides strong seal without slipping.
- Using thread linking to make connection more firmly Not easy to leak with 2 Rubber Ring,double sided protection.
- It can be used in water towers, water inlet and outlet, and self-made water storage barrels, which can be used for various pipes, faucets, hoses, fittings, etc.
4. Legines Brass Tube Fitting, SAE 45 Degree Flare Adapter Union, 5/16" Flare Male to 1/4" NPT Male (Pack of 2)
Feature
- SAE 45-degree flare head tube connection on one side and a male NPT connection on the other
- For connecting and disconnecting two tubes more easily than with a coupling
- Use with LP and natural gas, refrigeration, and hydraulic applications
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Resists mechanical pullout for a more secure connection
5. Anderson Metals Brass Tube Fitting, Half-Union, 1/2" Flare x 1/4" Male Pipe
Feature
- Half union for connecting and disconnecting two tubes more easily than with a coupling
- 45-degree flare head tube connection on one side and a male NPT connection on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
This Anderson Metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. It has a flared tube connection on one end and a male National Pipe Taper (NPT) connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This half union compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
6. Tailonz Pneumatic Brass Hose Barb Fitting -3/8 Inch Barb to 1/2 Inch Male NPT Adapter（Pack of 5）
Feature
- 【Product Name】Male Thread Barb Fitting【Material】 Brass.
- 【Size】 3/8″ Barb to 1/2″ Male NPT
- 【Temperature Range】 -40°F to 160°F【Maximum Pressure】150 Psi
- 【Premium Material】Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion.
- 【Typical Application】temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines.
7. Anderson Metals Brass Tube Fitting, Short Flare Nut, 1/4" Tube OD
Feature
- Short flare nut for connecting to a tube or fitting
- Connects to copper, brass, aluminum, or steel tubing
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
This Anderson Metals short flare nut compression tube fitting is made of brass, connects to a flared tube or fitting, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting connects to a flared tube or fitting and can be used with copper, brass, aluminum, or steel tubing. It is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This short flare nut compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
8. Anderson Metals Brass Tube Fitting, Connector, 1/4" Compression x 1/8" Male Pipe
Feature
- Three piece construction – nut, sleeve and body with attached insert
- Use with copper, brass, aluminium, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
Three piece construction – nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. 5/16″-24 and 7/16″-24 Thread sizes.
9. Anderson Metals Brass Tube Fitting, Short Forged Flare Nut, 3/8" Tube OD
Feature
- Short forged flare nut for connecting to a tube or fitting
- Connects to copper, brass, aluminum, or steel tubing
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
This Anderson Metals short forged flare nut compression tube fitting is made of brass, connects to a flared tube or fitting, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting connects to a flared tube or fitting and can be used with copper, brass, aluminum, or steel tubing. It is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This short forged flare nut compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
10. Anderson Metals 50062 Brass Compression Tube Fitting, Union, 3/8" x 3/8" Tube OD
Feature
- Three piece construction – nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
Three piece construction – nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. 3/8″ Tube outer diameter. 5/8″-18 Thread size.
Conclusion
By our suggestions above, we hope that you can found Brass Nut To Vacuum for you.Please don’t forget to share your experience by comment in this post. Thank you!
